1 / 16

Brian Hirsch , Ph.D . Senior Project Leader - Alaska National Renewable Energy Laboratory

Energy Systems Integration Facilities at NREL. Brian Hirsch , Ph.D . Senior Project Leader - Alaska National Renewable Energy Laboratory . Alaska Energy Storage Workshop Anchorage, AK June 20, 2012. Why Energy Systems Integration?. Current Energy Systems. Future Energy Systems.

marged
Télécharger la présentation

Brian Hirsch , Ph.D . Senior Project Leader - Alaska National Renewable Energy Laboratory

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Energy Systems Integration Facilities at NREL Brian Hirsch, Ph.D. Senior Project Leader - Alaska National Renewable Energy Laboratory Alaska Energy Storage Workshop Anchorage, AK June 20, 2012

  2. Why Energy Systems Integration? Current Energy Systems Future Energy Systems • Reducing investment risk and optimizing systems in a rapidly changing energy world • New energy technologies and services • Increasing penetration of variable RE in grid • New communications and control models • Electrification of transportation • Integrating energy storage • Increasing system flexibility • Understanding interactions between electricity/thermal/fuels

  3. Energy System Research and Development Across Technologies ESIF System Integration Capabilities • RE integration • Power electronics • Building integration • Thermal and PV system optimization Solar and Wind Buildings Grid Planning and Operations Energy Storage Advanced Vehicles Advanced Fuels • Sensors and controls • Design and integration • Modeling and simulation • System integration • CSP Thermal Storage • Utility scale batteries • Distributed storage. • H2/electric interfaces • RE electrolyzers • Storage systems • Standards • Fuel cell integration • Fueling systems • Plug-in-hybrids and vehicle-to-grid • Battery thermal management • Power electronics • Transmission and Distribution Systems • Smart Grid Technologies • Microgrids • Standards Full systems interface evaluation for integration of electricity, fuels, thermal, storage, and end-use technologies

  4. NREL’s Energy Systems Integration Facilities • Energy Systems Integration Facility (ESIF) • Distributed Energy Resources Test Facility (DERTF) • NWTC – Grid Integration Testing • Thermal Test Facility (TTF) • Vehicle Test and Integration Facility (VTIF) TTF

  5. NREL’s Energy Systems Integration Facility (ESIF) • NREL’s largest R&D facility (182,500 ft2) • Substantial completion by the end of 2012 • Space for 200 NREL staff and research partners • Focus of the ESIF is to conduct R&D of integrated energy systems (Electricity, Fuels, Transportation, and Buildings & Campus systems) Addressing the challenges of large-scale integration of clean energy technologies into the energy systems infrastructure

  6. Current Status and Construction Targets • January 6 - Completed all steel work • January 20 – 50% completed – on budget (total $135M) • April 2012 – complete all exterior work • October 2012 – substantial completion • November 2012 – commissioning • January 2013 – move-in

  7. ESIF’s Unique Advanced Capabilities Petascale HPC and data management system in showcase energy efficient data center. HPC Virtual utility operations center and visualization rooms. • Interconnectivity to external field sites for data feeds and model validation.

  8. ESIF - EnergySystem Simulated Operations A Flight Simulator for Energy System Operators • Operations techniques development for: • New systems configurations • Utility or fuel supply curtailments • High renewables penetrations • Extreme weather events • High storage penetrations • High demand response deployment • Resource forecast integration

  9. ESIF Laboratories Electrical Systems Laboratories Power Systems Integration Smart Power Energy Storage Electrical Characterization Energy Systems Integration Fuel Systems Laboratories Energy Systems Fabrication Manufacturing Materials Characterization Electrochemical Characterization Energy Systems Sensor Fuel Cell Development & Test Energy Systems High Pressure Test High Performance Computing, Data Analysis, and Visualization ESIF Control Room Energy Integration Visualization Secure Data Center High Performance Computing Data Center Insight Center Visualization Insight Center Collaboration Thermal Systems Laboratories Thermal Storage Process and Components Thermal Storage Materials Optical Characterization

  10. ESIF – Power Systems Integration Lab • Major Laboratory Equipment • Hardware-in-the-Loop Simulator (Opal-RT) • Grid simulator (4x270kW, 690Vac, 400Vdc, DC-800Hz) • AC load banks (4x250kW, Wye, 50W load step) • Bidirectional DC supplies (2x250kW, 0-900V) • SCADA Data Collection and Control System • PV Simulator (multi-module, 0-1000V or +/-500V) • Line length impedance simulator (480V, 1200A) • Research Chiller/Boiler (750 MBH boiler, 60ton chiller) Lab Functions • Main test lab for conducting electrical system integration activities. • Research will include exploring a variety of operating configurations including: grid connected stand-alone, microgrids, and hybrid power systems. • House infrastructure for DG research (electricity, thermal, and fuels)

  11. Energy Systems Integration – Large-scale A New Unique Testing Capability NWTC Grid Integration Capabilities will allow testing of many grid integration aspects for multi-MW utility-scale variable renewable generation and storage technologies.

  12. TTF - Labs Automated Home Energy Management Laboratory • Fully instrumented electrical system, from smart meter to every plug, light, and hardwired component • 3.2 kW photovoltaic (PV) array • Complete suite of residential appliances and end use loads • High frequency spectrum analyzer to study electrical noise • Multiple communication protocols are supported • Linked to ESIF Energy Storage Laboratory • The world’s most accurate battery calorimeters • Five environmental chambers and isothermal baths to perform accelerated lifetime and duty cycle testing across a wide thermal range • Thermal imaging to inspect for hot spots in cells and battery packages during charge and discharge cycles • Bitrode cyclers for battery and ultracapacitor pack cycling

  13. Vehicle Testing and Integration Facility (VTIF)

  14. VTIF Capabilities • 2 AC and 2 DC bus lines with configurable component connections • 2 fast charge system connections (1 indoor/1 outdoor) • 8 level II charge stations (includes wireless, high power for MD/HD vehicles, multi-headed, …) • 20kW of PV as fuel station canopy (dual axis tracking) • 30kWh, 30kW energy storage • Able to configure as microgrid • Commercial partners on Smart Grid controls system • 24 expansion ports for new components • Power supplies to emulate wind, solar, vehicle, or storage

  15. NREL’s Energy Systems Integration Facilities NWTC – 2MW+ NREL ESI - A unique national asset for energy systems integration R&D, testing, and analysis at various scales ESIF 1kW-2MW DERTF 1kW-200kW TTF TTF VTIF

  16. For More information on NREL Energy Systems Integration facilities • Energy Systems Integration Facility (ESIF) • http://www.nrel.gov/eis/facilities_esif.html • Ben Kroposki, Director of ESIF: benjamin.kroposki@nrel.gov • Distributed Energy Resources Test Facility (DERTF) • http://www.nrel.gov/eis/facilities_dertf.html • NWTC – Grid Integration Testing • http://www.nrel.gov/wind/facilities.html • Thermal Test Facility (TTF) • http://www.nrel.gov/buildings/facilities.html • Vehicle Test and Integration Facility (VTIF) • http://www.nrel.gov/docs/fy12osti/53297.pdf

More Related