1 / 37

650 MDS

Explore the layout, interfaces, and operating tips of the 650 MDS. Learn about keypad functions, interfacing with Sonde, GPS, PC, and battery charger, and how to calibrate and log data efficiently. Discover quick tips and essential accessories to enhance your user experience.

mariaswilliams
Télécharger la présentation

650 MDS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 650 MDS Multiparameter Display System

  2. Outline • Layout • Front & Rear Covers • Keypad & Characters • Interfacing • With: • Sonde • Sonde & GPS • PC • Battery Charger Quick Tips  Look here for tips on using the 650 MDS 

  3. Outline • Operating the 650 • Menus • Calibrating a sonde & UNCAL • Logging • Available Memory • Files • Site Lists • Parameter Mismatch • File Management • Uploading Files from sonde • Downloading to PC • Upgrading Software • Q & A

  4. Layout  Front Cover Display On/Off Quick Tips  Both the handstrap and lanyard can be switched to either side for ease of use.  Arrow Keys Backlight Key Escape Key Enter Key Handstrap Keypad MS-8 Connector Strain Relief Lanyard

  5. Layout  Rear Cover Accessory Connections Battery Lid Screws Barometer Patch Vent Battery Lid

  6. Layout  Keypad Backlight Key On/Off Arrow Keys Enter Key Escape Key Keypad

  7. Layout  Keypad • 1 = 1 • 2 = ABC2abc2 • 3 = DEF3def3 • 4 = GHI4ghi4 • 5 = JKL5jkl5 • 6 = MNO6mno6 • 7 = PQRS7pqrs7 • 8 = TUV8tuv8 • 9 = WXYZ9wxyz9 • - = Minus/Hyphen • 0 = 0 • . = Period/Decimal Point Quick Tips  To access the multiple characters associated with each key, just keep pressing the key until the character you want appears. 

  8. Interfacing • With: • Sonde • Sonde & GPS (user supplied) • PC • Battery Charger

  9. Interfacing a 650 with a Sonde • 650 MDS • Integral or Detachable Field Cable • YSI 6-Series Sonde  Here’s the list of what you need: • 650 MDS • Field Cable • 6-Series Sonde 

  10. Interfacing a 650 with a Sonde & GPS • 650 MDS • User supplied GPS unit w/DE-9 Cable • GPS Y-cable (6115) • Integral or Detachable Field Cable • YSI 6-Series Sonde  Here’s the list of what you need: • 650 MDS • GPS w/DE-9 Cable • GPS Y-Cable • Field Cable • 6-Series Sonde 

  11. Interfacing a 650 & PC • 650 MDS • PC Interface Cable (6112) • Personal Computer  Here’s the list of what you need: • 650 MDS • PC Adapter Cable • PC • *USB to RS232 Adapter

  12. Interfacing with a Battery Charger • 6113 Battery Pack Kit • 6116 Adapter Cable • 6123 Wall Charger • 6117 Rechargeable Battery • 650 MDS  Here’s the list of what you need: • 650 MDS • 6113 Battery PackKit 

  13. Operating the 650  Menus  When you turn the instrument on, this is the first screen to appear.  • GPS information • Date & Time • Barometer Reading • Battery life • Menu Icon

  14. 650 Main Menu Continued... Run Screen Sonde run Directory Upload to PC View file File memory Delete all files Sonde menu File Version Date & Time Power Sonde Baud rate to sonde Shut off time Comma radix ID Circuit Board Serial # Barometer Units Calibrate Barometer Interval Use site list Store Barometer Store Lat and Long Store site number Edit Site List Logging Setup System Setup 650 Flow Chart

  15. Sonde Menu Flow Chart Sonde Menu Discrete Sample Unattended Sample Conductivity DO % DO mg/L Various other Parameters Run Directory Upload to PC Quick Upload View File Quick view file Delete all files Calibrate Version Date Time Bat volts Bat life Free bytes Logging File Status Date & Time Comm setup Page length Instrument ID Circuit Board SN GLP filename SDI-12 address Language System Report “Report setup” includes a list of all enabled sensors. “Sensors enabled” gives a list of all available sensors and shows if they are enabled. Sensor Cal constants Setup Sensor Data filter Advanced

  16. Calibration using the 650 • From the 650 Main Menu: • Select ‘Sonde menu’ • Highlight ‘Calibrate’ • Choose Calibration mode • Follow instructions on screen • Screen will show ‘Calibrated’ when calibration is complete • When screen shows ‘Continue’ press • Press to continue calibration of other sensors

  17. Calibration  650 Main Menu   Main (Sonde Menu) 

  18. Calibration  Calibration   DO % Calibration Menu 

  19. Calibration  DO % Calibration Barometric Pressure   Choice to calibrate 

  20. Calibration  Calibrated Continue   Final Screen (once finished it backs you out) 

  21. The ‘UNCAL’ Procedure • Access the calibration routine for the sensor you want to ‘uncal’. • Instead of entering numbers • Press and hold the key • Press the key. Quick Tips  The Uncal Procedure can be helpful if a calibration was done incorrectly or if an ‘out of range’ calibration was accepted. It resets the unit back to factory calibration. 

  22. 650 Logging Available Memory • Low Memory • 12 File Names • 100 Site Names • High Memory • 35 File Names • 100 Site Names

  23. Logging to the 650Simple Logging • From the Main Menu highlight Logging setup. Press . • The ‘Use site list’ should be inactive. • Set the interval to 5 seconds (00:00:05) and press . • Press . • Highlight Sonde run and press .

  24. Logging to the 650Simple Logging • You should now see the Run screen:

  25. Logging to the 650Simple Logging • Enter “Pond” for a file name. • Press .  Once you have entered all the information, highlight OK and hit enter. On the 650 side you should see a blinking ‘Sample Logged’ 

  26. Logging to the 650Using a Site List • Press until you return to the Main Menu. • Under Logging Setup, Highlight ‘Use site list’ and press . • Highlight ‘Edit Site List’ and press . Remember  Every file name and site name will take up space in the 650 memory. 

  27. Logging to the 650Using a Site List • For file name enter “BLUELAKE”. • For each site name and site number, set them up as in the example below: Remember  Every file name and site name will take up space in the 650 memory. 

  28. Logging to the 650Using a Site List • Once your site list is set up, press until you reach the Main Menu. • Highlight Sonde run and press . • Select ‘start logging’ under the 650 menu and press .

  29. Logging to the 650Using a Site List Remember  If you choose a file/site number that already has data, the parameters must be exactly the same. 

  30. Logging to the 650Parameter mismatch

  31. Logging to the 650Parameter mismatch • Use this chart to Troubleshoot a Parameter Mismatch:

  32. File ManagementUploading: from Sonde to 650 • From the Main Menu, highlight Sonde menu and press . • Highlight File and press . • Select Upload or Quick Upload and press .  Choose PC6000 format for the fastest download and direct readability in EcoWatch 

  33. File ManagementUploading: from Sonde to 650 • You should be able to watch the upload process on the screen:

  34. File ManagementDownloading: from 650 to PC • You will need your PC adapter cable. • From the 650 Main menu, • File • Upload to PC • Select your file name, press .

  35. Upgrading 650 Software • You will need your PC interface cable. • Download the YSI Code updater from www.ysi.com • Run Installer on your PC • Go to - Start, Programs, YSI Code Updater. • Set the comm port, and press ‘Start Code Update’

  36. Additional Hints • Adjust contrast by holding down the BackLight key and pressing the Up / Down arrow keys • GPS readings can ONLY be logged to 650 memory - the system does NOT support logging to Sonde memory • GPS data is reported different in EcoWatch then what it is on the 650

  37. Questions

More Related