1 / 23

Simple Way to Install Auto Lock Door in Car

When the auto lock door in the car gets damaged, then it can be easily replaced without going to a technician. The process includes simple steps like door handle assembly, the type of lock, and reassembly. Take a look at these slides to learn the simple way to install auto lock door in the car.

markdouglasmotorwork
Télécharger la présentation

Simple Way to Install Auto Lock Door in Car

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Simple Way to InstallAuto Lock Door In Car

  2. If the old lock of your car door stops working or the key has broken off in the lock, then it better to install a new auto lock.

  3. If you want to put a new auto lock in your car door, then it not at all a difficult task you will imagine earlier.

  4. In most of the cases, you can also handle and manage the job in an hour without using any special tools.

  5. In the worst cases, the auto lock on the driver's door needs to be replaced when it will wear out or damaged.

  6. The below-given steps help you to install the auto locks in your car door easily.

  7. Accessing the interior

  8. Start the installation process by using a screwdriver to take out the screws hold in the armrest by the door and take off the covers of the speaker in the door.

  9. Take off the interior door panel that held by a series of plastic clips. Then push the screwdriver between the panel and metal frame to ease the panel out.

  10. Then remove the interior door handle with a plier and pull out the plastic clip. Twist it and allow the dangle to free for accessing the assembly of the lock.

  11. Door handle assembly

  12. Inside the door a lock core is placed that one joins with a road which is also attached to the door handle assembly.

  13. For installation you can disconnect the rod from the auto lock core in the door. Open up the clip and take out the door handle assembly.

  14. Then use the pliers to take off the pair of bolts which also holds the door handle assembly onto the rod.

  15. Lock

  16. If you want to take out the auto lock on the car, first move out the clip from the snap ring to release the lock.

  17. After that put the new lock in the place of the old one and ensure that the lock is placed properly on the way up.

  18. Then you have to put the clip back on the snap sign to secure the lock and make sure that when you insert the keys, that won't be twist up.

  19. Reassembly

  20. Then after put the door handle assembly into the door again and marked the place in which you reconnect the bolt on the rod and the rod to the lock core.

  21. After doing all this, test the key in the new lock to ensure that you will easily and properly open and close the door.

  22. When everything working well reassembles the door. Reverse the above steps for fitting the clips, replace the armrest and speaker cover.

  23. https://markdouglasmotorworks.com/ Thank You

More Related