1 / 5

Team #4 Project Health Monitor

Team #4 Project Health Monitor. To create a device that measures and logs weight and blood pressure with the data accessible from the internet. Circuit Subsections. SPI (LCD, USB Controller) SCI (RS-232, Scale, Card Reader, Debug) Ethernet (LAN Access) Keypad (Software) USB (Blood Pressure)

marshall
Télécharger la présentation

Team #4 Project Health Monitor

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Team #4 Project Health Monitor To create a device that measures and logs weight and blood pressure with the data accessible from the internet Team #4 Dan Chapman Mike Goodwin Joe Isca Brent Rager

  2. Circuit Subsections SPI (LCD, USB Controller) SCI (RS-232, Scale, Card Reader, Debug) Ethernet (LAN Access) Keypad (Software) USB (Blood Pressure) Power Supply (3.3 V, 5 V)

  3. Circuit Subsections Micro: MC9S12NE64 SPI: 1 SCI: 2 Ethernet 25 MHz (for Ethernet), 3.3V SPI (LCD, USB Controller) Micro acting as master with the devices acting as slaves Low-speed for LCD (~18 kHz) High-speed for USB (~12.5 MHz) Level translator for LCD (3.3V to 5V)

  4. Circuit Subsections SCI (RS-232: Scale, Card Reader, Debug) Using MAX3233 RS-232 Level Translator Two ports, using one for both Card Reader (input) and Debug (output) Ethernet Allow access from LAN Using Bel Fuse 0812-1X1T-36 RJ-45 w/ 2 USBA Keypad Software Driven

  5. Circuit Subsections USB (Blood Pressure) Using MAX3421E USB Host/Peripheral Controller with SPI Control Connection comes through Ethernet jack Power Supply 3.3V, 5V Using Linear Regulators Scale and Blood Pressure can be battery powered, or we can provide 9V and 6V respectively

More Related