1 / 12

Civil Engineering Department C ollege of Engineering Course: Soil and Rock Mechanics (CE 260)

Civil Engineering Department C ollege of Engineering Course: Soil and Rock Mechanics (CE 260). Lecturer: Dr. Frederick Owusu-Nimo. Soil Block Diagram. Soil Block Diagram. Volume of Voids, Vv = Va + Vw. W = Mg. Weight / Mass relationship.

marshalldavis
Télécharger la présentation

Civil Engineering Department C ollege of Engineering Course: Soil and Rock Mechanics (CE 260)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Civil Engineering DepartmentCollege of EngineeringCourse: Soil and Rock Mechanics(CE 260) Lecturer: Dr. Frederick Owusu-Nimo

  2. Soil Block Diagram

  3. Soil Block Diagram Volume of Voids, Vv = Va + Vw W = Mg

  4. Weight / Mass relationship • Water Content (w) is the ratio of weight of water to weight of solids expressed as percentage in terms of weight or in terms of mass • Obtained by drying wet sample in oven maintained at 105 - 110°C

  5. Unit Mass (Density) or Unit Weight • Bulk Unit Weight is total weight over total volume • Bulk Unit Mass ( Bulk Density) • Usually, when we say unit weight, we imply the bulk unit weight or wet unit weight

  6. Unit Mass (Density) or Unit Weight • Dry Unit Weight is weight of solids divided by total volume • Dry Unit Mass ( Dry Density) • Relationship between Dry and Wet Unit weight

  7. Determination of Density • For Cohesive Soils : Bulk density is determined using the core-cutter method. • For Granular or Cohesion less Soil: The bulk density is determined by the Sand replacement method

  8. Weight / Mass relationship • Specific Gravity (Gs) : of Soil particles or solids is the ratio of unit weight of solids (weight of solids divided by volume of solids) to unit weight of water or • Range of Gs for common minerals is 2.55 – 2.75

  9. Volume relationships • Void Ratio (e) : is the ratio of volume of voids to volume of solids expressed as a decimal fraction. • Porosity (n) : is the ratio of volume of voids to total volume expressed as a percentage. • Relationship between e and n • Degree of Saturation (Sr) • Air void Content (Χ)

  10. Relationship among Sr, e, w and Gs

  11. Example 1 • For a soil specimen; Given that • The moist mass of soil specimen is 20.7 kg • Specimen’s volume measured before drying is 0.011m3 • Specimens dried mass is 16.3kg • Specific gravity of solids is 2.68 • Determine • Void ratio • Degree of Saturation • Wet unit mass, dry unit mass • Wet unit weight • Dry unit weight

  12. Example 2 • For an undisturbed sample; Given that • Void ratio = 0.78 • Water content = 12% • Specific gravity of solids = 2.68 • Determine • Wet unit weight • Dry unit weight • Degree of saturation • Porosity

More Related