1 / 7

Easy Ways to Renovate your House Exterior Paint

To make your house beautiful and attractive don't forget your house exterior. Here are the best ways to renovate your house exterior painting by the best exterior painter in Toronto. Check out the PPT. Contact us today www.mascons.ca

mascons
Télécharger la présentation

Easy Ways to Renovate your House Exterior Paint

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Match the House Exterior Paint • Take expert advice if you are confused about how to match your house's exterior colors. • Exterior Paint can make a huge change. So to change the look of a house without excessive costs, you can get exterior painting onaluminum siding, vinyl, shutters, and even doors and windows.  • Theexterior painter recommends going for water-based paint. This fast-drying product is a spray gun applied and long-lasting. It is applied to a coating that is still good and not dented or damaged. • Painting your house can simply do a lot of house improvement. You can paint it by yourself but at the same time, you must use all the safety measurements, like use gloves, mask.

  2. Clean the walls For the best possible result, you must pressure wash the walls in your home, as any form of dirt or dust buildup will leave you with an uneven coat of paint.  Work from the top of the outer surface to the bottom, working in a fluid and controlled manner over the entire surface with overlapping strokes. When the walls have been thoroughly washed, take a complete tour of your home and repair any damaged surfaces, trying to spot cracks in the wood, siding, and stucco.  Apply epoxy-based putty to fill in any cracks or holes. When everything is dry, sand these sections using medium-grit sandpaper.

  3. Remove excess paint Remove excess paintthat is peeling off the facade. Place linens around your house and go ahead with the withdrawal. This can be done with a paint scraper, or just like with epoxy, you can use medium-grit sandpaper. Be sure to perform the job carefully, as any residue will interfere with the new coat.

  4. Repair and seal It is essential to seal any cracks or holes you find on the exterior of your home, especially those that can lead to mold growth. Locate the holes left between the exterior and the border and fill those spaces with an exterior caulk and a caulking gun. If your home is built with a mix of materials, add caulk to the surfaces where different materials meet to create additional protection. If your exterior siding material is wood, look for knots in the wood. Theexterior painter in Toronto recommends to applying a coat of stain-resistant primer using a small paintbrush. Next, protect all exterior doors, windows, and light fixtures using plastic sheeting and masking tape, as you won't want these items damaged or ruined along the way

  5. It's time to paint! Now that you've completed all of the preliminary steps, it's time to take action. It is recommended that you start by spraying the entire house with a matte or eggshell-colored exterior paint with a sprayer. If the shade is intense, you can stick with just one coat.  If you notice marks, it is better to make two coats rather than one. Work from top to bottom in a controlled manner, overlapping the sections of paint. Remember that a primer is not necessary when a fresh coat of paint of the same color is applied. Then move on to ornaments and finishing. At this point, you can remove the plastic from the doors, windows, and light fixtures. Start with two coats of semi-gloss paint, covering the woodwork with a small paintbrush.

  6. Mas Construction Painting Contractor in Toronto Amos Crescent, Toronto, ON City - NORTH YORK Zip - M3H 3X8 +1 647-835-0590 Info@Mascons.Ca www.mascons.ca

More Related