1 / 10

Biodiesel - Raw Materials

Biodiesel - Raw Materials. Oils from seeds Soybean, Rapeseed, Cottonseed, Sunflower seeds Fats Beef tallow, Pork lard Used cooking oils. Biodiesel - Chemistry. It is not vegetable oils or animal fats, it is made from vegetable oil or animal fat.

mendel
Télécharger la présentation

Biodiesel - Raw Materials

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Biodiesel - Raw Materials • Oils from seeds • Soybean, Rapeseed, Cottonseed, Sunflower seeds • Fats • Beef tallow, Pork lard • Used cooking oils

  2. Biodiesel - Chemistry • It is not vegetable oils or animal fats, it is made from vegetable oil or animal fat. • The oils and fats are chemically altered to make Biodiesel, a mono alkyl ester (methyl ester). • They will gum up the engine, if not chemically altered. + Methanol - Biodiesel Oils or Fats Glycerin

  3. ASTM 6751

  4. Using Biodiesel - Know Your Biodiesel Supplier • The B100 biodiesel fuel used in the blend must be sourced from a BQ-9000 Accredited Producer. • Certified Marketers and Producers can be found at the following website: http://www.bq-9000.org • National Biodiesel Board : http://www.biodiesel.org • Every batch of biodiesel is tested to meet ASTM 6751 standards. • Ask your supplier for a copy of test for your B-100.

  5. Using Biodiesel - Solvent • Filters can clog on initial use, especially with B20 and higher blends. • Due to the solvent nature of biodiesel, and the potential for “cleaning” of the vehicle fuel tank and lines, new fuel filters must be installed when switching to biodiesel on used engines. Fuel filters will need to be replaced at half the standard interval for the next two fuel filter changes.

  6. Oxidized Biodiesel • Sludge formation • Deposits • Filter plugging Deposits from oxidation in a B20 field test

  7. Using Biodiesel – Materials • Natural rubber, nitrile, and butile rubber are particularly susceptible to degradation. Also, copper, bronze, brass, tin, lead, and zinc can cause deposit formations. The use of these materials and coatings mustbe avoided for fuel tanks and fuel lines.

  8. Using Biodiesel - Storage • Use biodiesel fuel within six months of its manufacture. Biodiesel has poor oxidation stability, which can result in long term storage problems.

  9. Using Biodiesel - Microbial Growth • Biodiesel fuel is an excellent medium for microbial growth. Microbes cause fuel system corrosion and premature filter plugging. The effectiveness of all commercially available conventional anti-microbial additives, when used in biodiesel, is not known.

  10. Using Biodiesel – Colder Temperatures • Biodiesel fuel properties change at low temperatures, which can pose problems for both storage and operability. • Filters can plug and fuel in the tank can solidify at low temperatures if precautions are nottaken storage tank, or using cold temperature additives. • B2 – raises (CFFP) about 2 degrees F • B20 – raises (CFFP) about 7 degrees F • B100 – freezes at 32 degrees F

More Related