1 / 17

Modeling the Effect of Transmit Power and Physical Carrier Sense in Multi-hop Wireless Networks

Modeling the Effect of Transmit Power and Physical Carrier Sense in Multi-hop Wireless Networks. Yong Yang , Jennifer C. Hou and Lu-chuan Kung Department of Computer Science University of Illinois at Urbana-Champaign. Carrier Sensing Range d cs. Carrier Sensing Range d cs. Motivation.

milo
Télécharger la présentation

Modeling the Effect of Transmit Power and Physical Carrier Sense in Multi-hop Wireless Networks

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Modeling the Effect of Transmit Power and Physical Carrier Sense in Multi-hop Wireless Networks Yong Yang, Jennifer C. Hou and Lu-chuan Kung Department of Computer Science University of Illinois at Urbana-Champaign Y. Yang, J. Hou and L.-C. Kung

  2. Carrier Sensing Rangedcs Carrier Sensing Range dcs Motivation • Single-hop / Single-cell wireless networks s1 r1 s2 r2 Y. Yang, J. Hou and L.-C. Kung

  3. Interfernce Range din Motivation • Single-hop / Single-cell wireless networks s1 r1 s2 r2 Y. Yang, J. Hou and L.-C. Kung

  4. dcsdind Tx Power, CS Threshold Motivation • Single-hop / Single-cell wireless networks • Multi-hop / Multi-cell wireless networks s1 r1 s2 r2 • Objective: study the effect of Transmit Power and Carrier Sensing on Network Throughput Y. Yang, J. Hou and L.-C. Kung

  5. s1 r1 s2 r2 s3 Contributions • Model IEEE 802.11 based multi-hop networks • Incorporate important MAC/PHY attributes • Transmit Power, Carrier Sense Threshold • Consider accumulated signal effect • Analyze the effect of MAC/PHY attributes on network throughput Y. Yang, J. Hou and L.-C. Kung

  6. Outline • Motivation • Contributions • Accumulated Signal Effect • Analytical Model • Effect of Tx. Power and Carrier Sensing • Conclusions and Future Work Y. Yang, J. Hou and L.-C. Kung

  7. Consider a thin ring Ri outside dcs of width Dr: • Inner radius: • Signal level at s: • node together can make s sense busy • Effective contenting nodes ri Accumulated Signal Effect • Accumulated signals outside dcs may exceed CSth • Assumptions • Nodes are distributed by a Poisson point process with d • Nodes always have packet to transmit • Effective number of contenting nodes within dcs : s dcs Y. Yang, J. Hou and L.-C. Kung

  8. Accumulated Signal Effect (contd.) • Thus, the total effective contenting nodes: • Equivalently, we can use an effective carrier sense threshold • Similarly, we can obtain the effective SIR threshold s dcs Y. Yang, J. Hou and L.-C. Kung

  9. Idle Busy Collision Success … Model Overview • The MAC layer throughput of each sender s: • Tv: expected length of a slot • Four types of activities in a slot with respective to s • Pa: transmission attempt probability in a slot • Pc: collision probability given a transmission attempt Y. Yang, J. Hou and L.-C. Kung

  10. Model: Transmission Attempt Prob. • Bianchi models the back-off process of a node as a discrete-time Markov process • The unit of time is the virtual slot time • The key assumption: for each transmission attempt, it incurs a collision with a constant and independently probability Pc • This can be applied to multi-hop networks • The only different is the virtual slot time Y. Yang, J. Hou and L.-C. Kung

  11. Model: Virtual Slot Time • A virtual slot could be • Successful transmission: • Sender s transmits, and no collision • Collision: • Sender s transmits, but runs into a collision • Idle: • No node in CSsU{s} attempts to transmit • Busy: • Sender s is backing off, while at least one in CSs transmit • Expected length of a virtual slot Tsucc, Tcol, Tidleand Tbusy can be determined given MAC/PHY parameters Y. Yang, J. Hou and L.-C. Kung

  12. s r Model: Collision Probability Tp • A transmission is corrupted if • Any node in CSs INrstarts to transmit at the beginning of the transmission • Any node in INr \ CSsstarts to transmit at or even after the beginning of the transmission • The collision probability: t CSs INr d din dcs Y. Yang, J. Hou and L.-C. Kung

  13. Fixed Point Analysis • A set of fixed point equations: • We prove that a unique solution exists to this equations • But hard to find explicit formulas Y. Yang, J. Hou and L.-C. Kung

  14. Area 1000m1000m Payload 2048B Rate 36Mbps  4 Effect of Tx Power • The per-node throughput S decreases with the increase of d • Adjust transmit power to control d • Subject to connectivity constraint Y. Yang, J. Hou and L.-C. Kung

  15. d din dcs s r Effect of Carrier Sense • When dcs > d + din, the per-node throughput S decreases with the increase of dcs • The optimal dcs* exists in [0, d + din] Y. Yang, J. Hou and L.-C. Kung

  16. Conclusions and Future Work • Model IEEE 802.11 based multi-hop networks • Analysis and simulation show • Use power control to decrease d to improve MAC layer throughput • Adjust carrier sensing threshold s.t. dcs < d + din • Future Work • Online power control algorithm joint with carrier sense threshold adjustment • End-to-end throughput Y. Yang, J. Hou and L.-C. Kung

  17. Thank You and Questions? Y. Yang, J. Hou and L.-C. Kung

More Related