1 / 4

Superconducting Cavities Preparation & Testing – Draft for BCD

Superconducting Cavities Preparation & Testing – Draft for BCD. Lutz.Lilje@desy.de DESY -MPY- Snowmass 2005 Description of Cavity Preparation Basic steps BCD proposal for Cavity Preparation Process Disclaimer: This assumes the the material BCD choice: fine grain material

minerva-nicholson
Télécharger la présentation

Superconducting Cavities Preparation & Testing – Draft for BCD

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Superconducting CavitiesPreparation & Testing – Draft for BCD Lutz.Lilje@desy.de DESY -MPY- Snowmass 2005 Description of Cavity Preparation Basic steps BCD proposal for Cavity Preparation Process Disclaimer: This assumes the the material BCD choice: fine grain material For large-grain material choice might change (see materials section) Lutz Lilje

  2. General Requirements - Overview • The preparation of the cavities should finally result in fully assembled cavities (incl. power coupler to) which are ready for string assembly. • After delivery from the welder, several things are to be done: • Mechanical checks, inspection • Frequency tuning • Cleaning • Damage layer removal • Furnace treatments • Final frequency tuning • Final surface preparation • Final cleaning • Bake-out at 120-130°C • Low-power acceptance test • Tank-welding • Assembly for high power operation • High-power test • Although all these steps need improvements in QA/QC for a mass production, the most challenging one is to define final (electro-)chemical surface preparation to deliver a reliable and reproducible performance. • The overall workflow needs optimization. Lutz Lilje

  3. Agreed High Priority R&D Issues • Field emission control is the major R&D issue • Field emission is the major source for a large performance spread of cavities • Quality control issues for surface preparation needs a major effort • E.g. acid quality control • Surface quality after several preparation steps needs to be controlled • Roughness control before final EP • Rinsing procedures need quality control • E.g. online-monitoring of particles in water from water draining out of the cavity • Reduction of cross-contamination due to integration of quality control steps (e.g. frequency tuning) inside the cleanroom • Mass production issues for many steps need work • Basic R&D needed for understanding ‘recipes‘ that work: e.g. Bakeout etc. Lutz Lilje

  4. BCD Proposal • Hottest topics • Damage layer Removal • BCD: Electropolishing (EP) • ACD 1: Mechanical Grinding + small etch or EP • ACD 2: Etch • Furnace treatment • BCD: 800°C • ACD: 1400°C • Final surface preparation • BCD: EP • Final cleaning • BCD: High Pressure Rinsing with ultra-pure water • ACD 1: Dry-ice cleaning • ACD 2: Megasonic rinsing • Bakeout • BCD: ‘In-situ‘ bakeout 120 • ACD: Air bakeout as part of the drying process Lutz Lilje

More Related