1 / 15

Introduction to CSS/SLS

Introduction to CSS/SLS. Check Support Sheet (CSS) Standard Limit Sheet (SLS). Issued June 2013. Index. Purpose for FMC and suppliers Scope for the CSS and SLS Introduction to CSS Introduction to SLS CSS and SLS in workflow How to access the SLS and CSS from the Intranet.

mingan
Télécharger la présentation

Introduction to CSS/SLS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Introduction to CSS/SLS Check Support Sheet (CSS) Standard Limit Sheet (SLS) Issued June 2013

  2. Index • Purpose for FMC and suppliers • Scope for the CSS and SLS • Introduction to CSS • Introduction to SLS • CSS and SLS in workflow • How to access the SLS and CSS from the Intranet

  3. Purpose for FMC and suppliers

  4. Scope • CSS – Check Support Sheet • To support the review of production plans, certificates and reports • To raise FMC standard requirement for each different manufaturing document (MD) • SLS – Standard Limit Sheet • A tool dedicated to checking material certificates and making sure these are according to requirements • To merge parameters from different standards into one sheet

  5. Check Support Sheet (CSS)

  6. Introduction of CSS (I) • Call-outs from the most significant data fields in a MD with supporting text on how and what to check * How to verify this parameter * What is acceptance criteria * How to check this parameter * What is FMC requirement

  7. CSS may cover the check of

  8. Example – CSS for Traceability Lists

  9. Standard Limit Sheet (SLS)

  10. Introduction of SLS (I) • To verify the chemical and mechanical properties of the material to be within the defined limits

  11. Introduction of SLS (II) • SLS may cover the check of following material parameters • Grade • Delivery Condition of Product • Heat Treatment • Chemical Composition • Mechanical Properties • Corrosion Test • ... ...

  12. Example

  13. Where to access the CSS and SLS FMC Intranet FMC Global Supplier Site

  14. FMC Intranet

  15. FMC Global Supplier Site The CSS and SLS are located here!

More Related