1 / 18

Introduction

Using Maximum Wind Speed to Limit Off-Site Inventories for 1-Hour NAAQS Modeling James Boylan (GA EPD), Peter Courtney (GA EPD), Yan Huang (GA EPD), Leigh Bacon (ADEM), and Tom Rogers (FL DEP) 2012 EPA Region 4 Modelers Workshop November 14, 2012 – Atlanta, GA. Introduction.

minowa
Télécharger la présentation

Introduction

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Using Maximum Wind Speed to Limit Off-Site Inventories for1-Hour NAAQS ModelingJames Boylan (GA EPD), Peter Courtney (GA EPD), Yan Huang (GA EPD), Leigh Bacon (ADEM),and Tom Rogers (FL DEP)2012 EPA Region 4 Modelers WorkshopNovember 14, 2012 – Atlanta, GA

  2. Introduction • Since steady-state plume models do not inherently account for transport distance, there should be a limit to which sources are modeled together for determining a concentration associated with each hour. • Historically, we’ve included sources out to 50 km (and beyond) when the critical averaging times associated with the NAAQS were 24-hr or longer. • Now that the critical averaging time is1-hour, the default transport distance should be re-evaluated in light of the steady-state plume limitations.

  3. Plume Interaction How far from “A” would another source “B” need to be before the plumes from these sources would interact during the same one-hour time period? A B Wind = y km/hr Distance = x km The effluent from “A” emitted at the beginning of the 1-hour period travels y km in one hour. This effluent cannot combine with “B” during this same 1-hour period unless “B” is within y km of “A” (x < y). If not, then the two plumes cannot interact within that same hour.

  4. A Few Options to Consider • GA EPD • Use the maximum wind speed • Most conservative of three approaches • ADEM • Use the 99th percentile (SO2) wind speed for SO2 and the 98th percentile wind speed for NO2 • Same form as the 1-hour NAAQS • FL DEP • Use ADEM approach plus account for interaction time • Least conservative of three approaches, but might be most realistic

  5. GA EPD Example • Use the maximum 1-hour wind speed in the 5-year meteorological data set • 11.3 m/s  40.7 km max. transport distance • Can use this information to reduce the receptor grid and reduce the off-site emission inventory • Such a reduction does not eliminate the inclusion of sources outside this distance from the overall analysis since these sources will be accounted for in the background concentration.

  6. Refined 1-hr NO2 Modeling

  7. Refined 1-hr NO2 Modeling

  8. 1-hr SO2 Significance Modeling

  9. 1-hr SO2 Significance Modeling

  10. Max. Wind Speed by Sector

  11. 1-hr SO2 Significance Modeling

  12. GA EPD Summary • Refined 1-hr NO2 modeling • Reduced the number of receptors by 33% • 33,927 (50 km) to 22,889 (41 km) • When the 41-km grid is used for refined 1-hr NO2 modeling, no concentrations greater than the 1-hr NAAQS are identified. • Refined 1-hr SO2 modeling • Reduced the number of off-site sources assessed in the refined SO2 model by more than 50%.

  13. ADEM SO2 Travel Distance

  14. ADEM NO2 Travel Distance

  15. Interaction Time Interaction zone Overlap in same hour 1-Hour B A How much overlap of the two plumes is required to constitute a significant interaction (i.e., include both plumes in the same hour average)?

  16. FL DEP Example • Use the 99th percentile wind speed from Tampa to determine the maximum distance a plume could travel in one hour. • 7.82 m/s  28.2 km/hr • Thus, sources beyond 28.2 km would never interact within the same hour. • If some degree of interaction is considered, then the maximum distance is proportionately reduced by the fraction of overlap. • If 30 minutes of overlap is used (0.5 hour), the maximum distance would be 14.1 km.

  17. AECOM Study • “Short‐Range Model Distance Applicability Study” by Bob Paine (AECOM) at the 10th EPA Modeling Conference • Compared steady‐state model vs. non‐steady‐state model with constant meteorological conditions • Results suggest that a 20‐km limit seems more appropriate for steady‐state model (e.g., AERMOD) applicability rather than the current limit of 50 km • AERMOD should provide information to users regarding hourly plume travel time

  18. Contact Information Jim Boylan, Ph.D.Georgia Dept. of Natural Resources4244 International Parkway, Suite 120Atlanta, GA 30354James.Boylan@dnr.state.ga.us 404-362-4851

More Related