How To Make An Electric Scooter

1. How To Make An Electric Scooter Down And Dirty DIY

2. You can actually make your own best electric scooter. Did you ever wonder if it were possible to build your own electric scooter? It’s not as difficult as you might think, although it does help to have some basic DIY experience first. You really can build a cool do it yourself scooter that will let you ride around the neighborhood. This How To Make Electric Scooter guide will help. It may not be the best foldable electric scooter for adults, but it is fun.

3. This article is intended to give you the basic steps that you will need in order to get this project done and have a road-worthy motorized e-scooter beneath your feet as you are flying down the road. This is down and dirty. It’s not a polished top of the line scooter with super speed from a brand name electric scooter company. So let’s get to it.

4. How To Make Electric Scooter In A Few Easy Steps The first thing you’ll need is a decent frame. Why build one from scratch? Just get your hands on an old kick scooter. Any size will do. Kick scooters are everywhere. Just make sure that you will fit on it comfortably. Next, you will have to locate a battery-powered electric DC engine. Just make sure that the motor has the proper torque that you will need. I suggest at least 50-watt motor since you want it to propel you, but you don’t want the vehicle to go too fast and be dangerous. Safety first. You will also want to track down at least four 12-volt lead-acid batteries for the power. For both of these items, an electronics store is a good place to start.

5. You Really Can Make An Electric Scooter Now we are getting into the heart of this project. The next step is to locate the engine’s crankshaft. This is the metal cylinder that sticks out from the motor. When the engine is running, this part turns. You will need to attach a sprocket onto the crankshaft using a bolt and then attach another one onto the scooter’s rear wheel axle. Next, the engine is going to be attached to the deck of the e-scooter. You can use some heavy-duty straps, either bolting it to the deck or using a strong glue, as long as it is secure. Just make sure that both sprockets match up.

6. Now the engine needs to connect to the scooter’s back wheel. You are going to use a bicycle chain that will connect the motor-sprocket to the sprocket on the wheel. If the chain is too big, you can use a universal chain tool to shorten it. In some cases, you may need to modify the housing around the scooter wheel so that the chain can move freely.

7. Almost Finished With Your DIY Scooter We are almost through the steps needed to learn how to make an electric scooter. Now we just need to connect a switch that will turn the motor on and off. To do this you will need to use a power controller. Just connect the motor to the power controller and wire the controller to a switch. A lever switch is your best choice. You can have the wiring run up the scooter’s handlebars, keeping them in place with some zip-ties. Then secure the switch to the handlebars and now you can start and stop the engine. Your electric scooter is ready to ride.