1 / 21

Introduction to Electronic Noise

Introduction to Electronic Noise. Inherent vs External Noise Sources Types of Inherent Noise Noise Models. Inherent Electronic Component Noise. Inherent Device Noise: Internally Generated in Devices from Thermal Energy Internally Generated in Devices from Charge Carrier Motion

mminter
Télécharger la présentation

Introduction to Electronic Noise

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Introduction to Electronic Noise • Inherent vs External Noise Sources • Types of Inherent Noise • Noise Models

  2. Inherent Electronic Component Noise • Inherent Device Noise: • Internally Generated in Devices from Thermal Energy • Internally Generated in Devices from Charge Carrier Motion • May be related to Manufacturing Processes • Reduction Strategies: • Increased power consumption, bias current • Changing circuit topology • Optimizing R, C and L values

  3. External Noise • External Noise: • Electromagnetic Radiated and Conducted • Noise from Xfmrs, Power Sources and Supplies • Cross Talk and Interference from Other Signals • Device Substrate Noise from other nearby devices on the same substrate • Power Supply Noise and PSRR • Reduction Strategies: • Common Mode Chokes, Ferrites • Optimizing Circuit Layouts • Shielding • Isolated Power Supply, Grounding

  4. Electronic Noise Properties • Caused by the discrete nature of charge currents including charge carriers, junctions and geometry • Semiconductor Substrate & Process Dependencies • Determine fundamental SNR and smallest useable signals that can be processed by the devices • Can only be minimized and not completely removed

  5. Noise is often expressed as a Volts per Root-Hz (Noise voltage integrated over frequency in above integral)

  6. Inherent Noise Sources Presented are Uncorrelated!

  7. For lower noise, limit bandwidth to only that required for signals

  8. 1.380658E-23 J/K (aka: Johnson Noise) Example: vn = SQRT{4(1.38E-23J/K)(300K)(1000Ohms)(1Hz) = 4.07nV/RHz

  9. elementary charge q 1.60217733 E-19 C 1K resistor with 50uA from before: Shot Noise Calculation in = SQRT {2(1.602E-19)(50uA)(1hz)} = 4.0027E-9 mA/RHz vn = in(1000ohms) = 4.0027nV/RHz

  10. High Dependency on Semiconductor Process Ask Semi Mfg what their flicker noise characterization is for a given process

More Related