1 / 33

OxyFuel Equipment Section 7

OxyFuel Equipment Section 7. Introduction. Oxyfuel welding is a fusion welding process that uses oxygen and a fuel gas to provide the heat and shielding for welding. Requirements. An oxyfuel system must: store the two gasses, regulate the pressure, set the flow rate, mix the gasses,

moke
Télécharger la présentation

OxyFuel Equipment Section 7

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. OxyFuel EquipmentSection 7

  2. Introduction • Oxyfuel welding is a fusion welding process that uses oxygen and a fuel gas to provide the heat and shielding for welding.

  3. Requirements • An oxyfuel system must: • store the two gasses, • regulate the pressure, • set the flow rate, • mix the gasses, • deliver the mixed gasses to the weld.

  4. Fuel Gasses • Propane (LPG) • Natural Gas • Acetylene • MAPP • Hydrogen What are the advantages and disadvantages of each gas?

  5. Uses • How many people have used an oxyfuel system? Is there anything else that it be used for? Why has the use of oxyfuel welding declined?

  6. OxyFuel Safety • Remember safety is based on a conscious decision and the management of hazards. What hazards are associated with an oxyfuel system? How do we manage these hazards?

  7. OxyFuel system • Before learning to use an oxyfuel system, it is important to know the name and function of each part. • Oxygen safety disc • Oxygen cylinder valve • Oxygen cylinder pressure gauge • Oxygen working pressure gauge • Oxygen regulator • Oxygen regulator adjusting screw • G. Acetylene cylinder safety disc • H. Acetylene cylinder valve • I. Acetylene cylinder pressure gauge

  8. OxyFuel System--cont. J. Acetylene working pressure gauge K. Acetylene regulator L. Acetylene regulator adjusting screw M. Acetylene hose N. Oxygen hose O. Acetylene torch valve P. Oxygen torch valve Q. Torch R. Welding tip S. Acetylene cylinder T. Oxygen cylinder

  9. Oxyfuel System Components

  10. Oxygen Cylinder • What are the characteristics of an oxygen cylinder? What are the primary hazards in the use of an oxygen cylinder?

  11. Oxygen Cylinder Valve • What is different about an oxygen valve compared to a water faucet? How far should it be open when in use?

  12. Oxygen Valve—Parts Upper seat Lower seat Safety nut Safety disc Cylinder connection Regulator connection Stem nut Valve stem Hand wheel

  13. Oxygen Valve—cont. Closed • Open

  14. Acetylene Cylinder • What are the characteristics of an acetylene cylinder? What are the primary hazards in the use of an acetylene cylinder?

  15. Acetylene Valve • What is different about an acetylene cylinder valve compared to an oxygen cylinder valve?

  16. LPG Gas Cylinders • How is an LPG cylinder different from an oxygen or acetylene cylinder?

  17. Regulators • What is the function of an oxyfuel regulator? Regulator parts: Pressure adjusting screw Bonnet Needle valve Hose connection Cylinder connection Needle valve seat Diaphragm Spring Nylon thread insert How does it work?

  18. Regulators—cont. Do all regulators have a pressure adjusting screw? No. Some are fixed pressure.

  19. Regulators—cont. What hazards are associated with oxyfuel regulators?

  20. Regulator Creep • What is regulator creep? What can cause regulator creep? What hazards are associated with regulator creep?

  21. Gauge Not Returning To Zero • Why would a gauge not return to zero? What can cause this condition? What are the possible outcomes of using a regulator that has a gauge that does not return to zero?

  22. Backfires and Flashbacks

  23. Backfire • What is a backfire when using an oxyfuel torch? How do you know when a backfire has occurred? What is the primary cause of backfires? What are the hazards associated with a backfire? What should you do when one occurs? What What is the risk of a backfire?

  24. Flashback • A. What is a flashback when using an oxyfuel torch? B. How do you know when one has occurred? C. What causes flashbacks? D. What should you do if you suspect one has occurred? E. What is the potential hazard of a flashback? F. What is the risk of a flashback?

  25. Check Valves and Flashback Arrestors • What is the purpose of a check valve? What does a flashback arrestor do?

  26. Working Pressure

  27. Working Pressure • Oxygen and fuel gas working pressure should be set according to manufactures recommendations for the job being performed. What factors influence the ideal working pressure? Can excessive working pressure cause problems when welding? Yes. What are they? Can insufficient working pressure cause problems when welding? Yes. What are they?

  28. Oxyfuel Torch • What is the purpose of the oxyfuel torch? Important facts when using oxyfuel torch.

  29. Hoses and Connections • Are there any unique characteristics of oxyfuel hoses? Are there any unique characteristics of oxyfuel hose connections? How should hoses be treated?

  30. PPE • What are the three primary hazards associated with oxyfuel systems and how are they managed? HazardManagement Harmful light Shaded goggles or face shield Hot metal Pliers and gloves Flying molten droplets Welding apparel

  31. Setting Up Oxyfuel System • Extinguish all open flames and stop processes that produce sparks. • Steps (assuming new system) • Secure cylinders • Remove caps • Crack cylinder valves • Connect regulators • Open cylinder valves • Connect hoses to cylinders • Connect hoses to torch body • Connect welding tip to torch body • Set working pressures • Check system for leaks.

  32. Shutting Down System • Close cylinder valves • Open torch valves • Leave open until regulator gauges read zero. • Some sources recommend doing fuel first and oxygen last. • Close torch valves • Release tension on regulator adjusting screw. • Roll up hoses and place torch in a safe position.

  33. Questions?

More Related