1 / 3

Unit 1 PPA 3 ENTHALPY OF COMBUSTION

Unit 1 PPA 3 ENTHALPY OF COMBUSTION. (1) C 2 H 5 OH(l) + 3O 2 (g) 2CO 2 (g) + 3H 2 O(l). (2). thermometer. known mass of water. Ethanol in spirit burner. ENTHALPY OF COMBUSTION (Unit 1 PPA3). The enthalpy of combustion is the energy released when one mole of a substance is

monte
Télécharger la présentation

Unit 1 PPA 3 ENTHALPY OF COMBUSTION

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Unit 1 PPA 3 ENTHALPY OF COMBUSTION

  2. (1) C2H5OH(l) + 3O2 (g) 2CO2 (g) + 3H2O(l) (2) thermometer known mass of water Ethanol in spirit burner ENTHALPY OF COMBUSTION (Unit 1 PPA3) The enthalpy of combustion is the energy released when one mole of a substance is completely burned in oxygen. The aim of this experiment is to determine the enthalpy of combustion of ethanol. A measured mass of ethanol is burned in a spirit burner and the heat released is transferred to a copper can containing a known volume of ethanol. From the resulting temperature rise, the enthalpy of combustion of ethanol can be calculated. (1) Write the balanced equation for the enthalpy of combustion of ethanol. • Draw a labelled diagram of the apparatus used in this experiment. (3) The value for the enthalpy of combustion determined using this apparatus is much less than the accepted value. Give two reasons for this lower value. 3. Heat losses to the surroundings. and Incomplete combustion of ethanol.

  3. (4) What measurements are taken during this experiment? (4) The initial water temperature. The highest water temperature reached. The mass of water being heated (in kg). The mass of ethanol burned. (5) The enthalpy change during the reaction is calculated using DH = - cmDT (a) (i) What is c ? (ii) What is the value of c for water? (b) If 200 cm3 of water is heated, what is the value of m? (5) (a) (i) c is the specific heat capacity of water. (ii) 4.18 J kg-1 oC-1. (b) m = 0.2 kg (6) In an experiment it was found that the temperature of 200 cm3 of water rose from 20.1oC to 32.5oC when 0.42g of ethanol was burned. Calculate the enthalpy of combustion of ethanol. (6) DH = - cmDT = - 4.18 x 0.2 x 12.4 = - 10.37 kJ When 0.42 g of ethanol burns DH = - 10.37 kJ So when 1 mole, 46g, of ethanol burns DH = - 10.37 x 46/0.42 kJ = - 1135 .76 kJ

More Related