1 / 21

Beetel

Beetel. Model 450BX, BX-2. Migration to New Schoolnet Network. Procedure as follow:- Configure Pc for Modem re-configuration Reset Modem Configure Modem 4. Check Connection. Pc Configuration - Proxy. Edit Proxy Settings as follows:- Open Internet Explorer.

monty
Télécharger la présentation

Beetel

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Beetel Model 450BX, BX-2

  2. Migration to New Schoolnet Network Procedure as follow:- Configure Pc for Modem re-configuration Reset Modem Configure Modem 4. Check Connection

  3. Pc Configuration - Proxy Edit Proxy Settings as follows:- Open Internet Explorer. Click : Tools -> Internet Options-> Connections ->LAN settings Uncheck: Proxy server.

  4. Pc Configuration – LAN Settings Edit LAN settings as follows:- Go to Local Area Connection Properties -> Internet Protocol version 4 (TCP/IPv4) Properties Choose :Obtain ip address automatically, Obtain DNS Server address automatically Click: Ok, Ok , Close.

  5. Reset Modem Power Modem and Press Reset Button for 15 Secs as described below

  6. Check Access to Modem from PC Make sure PC is connected to Modem using LAN cable On Pc, Open Command Window as follows:- Click Start,-> Run , Type CMD, Enter. At Command Prompt, type: ping 192.168.1.1, Enter. Modem will reply as indicated below.

  7. Configuration Access Modem from Browser ( e.g Internet explorer/ Firefox etc) as follows: In Browser, type modem ip address: 192.168.1.1 Username : admin Password : admin

  8. 1. Click Advanced Setup -> WAN2. Remove 2 unused Wan interfaces. Tick the check boxes and click Remove as shown.

  9. Configure WAN interface Click Edit.

  10. Configure VC Set VPI value to 8 Set VCI value to 35 Click Next

  11. Connection Type Leave setting on PPP Over Ethernet (PPPoE) Click Next

  12. PPP Configuration 1. Enter ppp username and ppp password for adsl provided by ISP(MT)2. Change MTU size from1492 to 14003. Click Next at bottom of page

  13. NAT Setting Change Service name to Schoolnet Click Next

  14. Click Save.

  15. Click Save/Reboot

  16. Interface Group Re - Access modem via Browser Click Advanced Setup -> Interface Group Remove tick in Enable Virtual ports Click Save/Apply

  17. Configure Wi-Fi SSID Click Wireless and Change SSID setting from Broadcom to Schoolnet Click Apply/Save

  18. Configure Wi-Fi Security Under Wireless click Security Click Network Authentication Dropdown menu Select WPA2/PSK

  19. Wi-Fi Security Insert new WPA password as indicated below Click Save/Apply

  20. Enable proxy in Browser Note: Proxy Server settings must be re-enabled to have internet access In Internet Explorer, go to Tools-> Internet Options-> Connections-> LAN Settings . Tick the Checkbox under Proxy Server Click OK

  21. Check Internet Connectivity DSL should be Solid Green showing Sync is up Internet should be Green showing internet is up

More Related