wooden gift box manufacturers

1. Ordinary wooden box production process First of all, the purchased sheet is processed into a thick and thin sheet, the surface is smooth, and then the sawing board is spliced, and the general white latex is used for splicing. Then fixed, after a day it will do it.wooden jewelry box manufacturers Secondly, the treated wood board should be polished, and then put on the putty. After a day of polishing, if it is uneven and then polished, it must be smooth because it depends on the smoothness and smoothness of the paint.wooden craft box manufacturer Then it is the primer, after a day of polishing, you can use water sandpaper, starting from 600, and then painting and then grinding more than 600, until the hand feels smooth. Finally brush the topcoat, thin and even. It will be completed in a week. It is also common to draw beautiful patterns on wooden boxes. If you have special requirements, you should also specialize in pattern making, soak the prepared pattern in water for a few seconds, take it out and stick it directly on the wooden box, then use the scraper to hang the water inside, and leave it. After less than 10 hours, gently peel off the upper plastic film and cover it with a top coat.wooden perfume box manufacturer