1 / 30

A direct search for K s  3 0 decay at KLOE

M. Martini, INFN Frascati, for the KLOE collaboration. 7-11 June 2004. INFN, LNF. A direct search for K s  3 0 decay at KLOE. K S 3 p 0. This decay has never been observed but is allowed by SM [CP violating; CP(K S )=+1, CP(3 p 0 )=-1]. From theoretical point of view:.

mya
Télécharger la présentation

A direct search for K s  3 0 decay at KLOE

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. M. Martini, INFN Frascati, for the KLOE collaboration. 7-11 June 2004 INFN, LNF A direct search for Ks 3 0 decay at KLOE

  2. KS3p0 • This decay has never been observed but is allowed by SM • [CP violating; CP(KS)=+1, CP(3p0)=-1]. • From theoretical point of view: All KLOE statistics  0.9 signal events produced (e=100%) Current published limit: BR(KS3p0) < 1.4x10-5 (SND, PL B459 1999) • The observation of this decay would confirm CP violation in KS • system. • Uncertainty on KS3p0 amplitude limits precision on CPT test • (Bell-Steinberger relation).

  3. KS3p0 KLCRASH b0.22 • KS tagging: from KL interactions on EMC KLCRASH(e~30%) This algorithm searches KL which interact directly on EMC. KLCRASH calorimetric clusters are selected using energy and b*. • High bkg rejection needed: • major expected background: KS2p0 (BR31%) + 2 fake photons either from • shower fragments or accidental overlap with clusters from machine • background.

  4. -- KS3p0 (MC) -- MC BKG  DATA • A kinematic fit is applied on the • Ks side requiring the conservation of • 4-momentum (NDOF=11). •  c2FIT Photons counting and Kinematic fit DATA=450pb-1 (2001+2002); MC =540pb-1 (all available statistics) • Preselected signal sample (KLCRASH and 6 photons): 39728 events • Normalization Sample (KLCRASH • and 4 photons): 23.5x106 events c2FIT< 30 is not enough (2/3 of bkg rejected)! Other discriminating variable have to be used: (c22p, c23p)

  5. The c22p KLCRASH + 4 photons  DATA -- MC The c22p is built selecting 4 out of 6 clusters which satisfies better the kinematics of KS  2p0 • The parameters used are: • mass distribution • opening angle between pions in • KS C.M. frame • 4-momentum conservation The calibration is done using KS2p0sample.

  6. The c23p  KS3p0 MC  DATA MCbg The c23p is based only on the 3 “best reconstructed” pion masses

  7. c23p c23p DATA-MC comparison • We define a signal box and 5 control boxes.

  8. c23p DATA-MC comparison • A small fraction of the background (3%) is constituted by fake KLCRASH • (KSp+p-) + KL3p0. Our MC well reproduces such fakes.

  9. Analysis summary • To increase bkg rejection we use • these analysis cuts: • Track veto: • to reject events with tracks • coming from IP. • DECUT: • After finding the four photons satisfying the kinematics • of KS2p0, the residual energy of the KS is measured: • E(KS) = EKs- Eg • 2 bodies decay  E(KS)~ 0 MeV • 3 bodies decayE(KS)~ Mp Rejecting events with: DE(KS)<10 MeV

  10. c22p all c22p>40 • TRKveto 14<c22p<40 c22p<14 • DECUT + c2FIT Analysis summary • No Cuts

  11. Candidates • We have optimized our analysis cuts looking at MC • c22p • c23p • c2FIT • DECUT c22p  DATA  MC c23p • e = (22.6±0.8)% • We count 4 candidates with • 3.2±1.4±0.2 • expected by MC • N3p ≤ 5.76@90% CL • Folding the proper bkg • uncertainty.

  12. Upper Limit determination • Using this upper limit we can calculate some parameters • directly related to CP and CPT test. Using PDG values and our limit: • We derive from our analysis: This improves of a factor ~70 the previous limit.

  13. Related parameters • Our limitcan be compared with NA48 • - interference term between KSKL in the • same final state (proportional to Re(h000) • and Im(h000)). KLOE versusNA48 (hep-ph/0310152) SND 90% CL • Assuming CPT invariance and ignoring • transition into I=3 final state: • Re(h000)=Re(e). • We can calculate the contribution of • 3p0 decay at Im(d) (Im(d)000) using • unitarity relation (eS,L=e±d):

  14. Related parameters • Since these are 2 opposite values, • we obtain the limits: Im(d)000 becoming negligible on the determination of Im(d) f000(rad) This value is based only on unitarity and increases the precision on Im(d) of  2.5 • The most conservative approach is to assign a phase toa000 • which gives the minimum and maximum values of Im(d)000:

  15. Conclusion • A direct search for KS3p0 decay has been performed • using the whole statistics collected at KLOE during 2001- • 2002 data taking. • We set an upper limit on the branching ratio to • 2.1x10-7 @ 90% C.L. • This reduce of a factor ~70 the previous limit. • This limit makes completely negligible the contribution of • this decay on Im(d) reducing of a factor~2.5 the • uncertainty on Im(d)

  16. Additional information

  17. The c23p  DATA  MCbg Due to DAFNE bkg which satisfy the trigger. Reduced by our Splash Filter: rmean > 70 cm Emean > 70 MeV “SPLASH” events Good agreement DATA-MC in all the regions  DATA MCbg  DATA MCbg  KS3p0 MC c2FIT < 30 Thec23pis based only on the 3 reconstructed pion masses

  18. DATA-MC comparison DATA ? FAKEKCRA MCbg In the data, a new category of BKG events (not simulated by the standard Kcrash MC) appears. The simulation takes into consideration only KL decaying after a cilinder bigger than DCH and smears the KL MC direction with the Kcrash resolution observed in data.

  19. The Kcrash fake background • A small fraction of the background (3%) is constituted by • a fake Kcrash and a KL 3p0 decay. • The fake KLCRASH is generated mostly by KSp+p- event, • where the pions, spiralizing around the pipe, interact on • the quadrupoles creating late clusters in the event. • We have add the simulation of these events in the MC and • calibrated their quantity.

  20. DATA-MC “fakes” comparison • Outside the • KLCRASHb* • windows DATA are • dominated by fakes • In the central band • there is also a small • percentage of • KLCRASH.  DATA -- MC Fake  DATA -- MC Fake EKLCRA EKLCRA EKLCRA b* Comparing events with tracks from IP. b*  MC fakes only (i.e. no Kcrash)  DATA dominated by fakes

  21. The agreement between DATA and MC is better than 10% in all the regions. c22p Region Nev (Data) Nev (MC) SBOX 337  18 309.5  16.3 UP Cup UP 493  22 479.8  21.2 DOWN 382  19 426.5  14.4 CSbox 5502  74 5595.1  51.0 CSox Cup 11249  106 11744.1  74.0 SBOX Cdown 24396  156 23844.9  103.8 DOWN Cdown c23p DATA-MC comparison

  22. Monte Carlo calibration -- DATA -- MC -- KCRAMC -- FAKEKCRA Normalized with the full sample Ng=6 (A) (B) Mean KCRAMC 0.446 0.447 0.447 FAKEKCRA 1.002 0.895 0.949 c23p < 3.5 FIT data using shapes from MC: ID(DATA) = a1 ID(MC)+ a2 ID(FAKES) Two different regions used: c23p < 3.5 (A) c23p < 8.8 (B) After removing SBOX

  23. DATA-MC comparison (I) c23p all c23p > 3.5  DATA -- MC  DATA -- MC c23p < 3.5 c23p< 8.8  DATA -- MC  DATA -- MC Normalization with the mean values of the coefficients

  24. DATA-MC comparison (II) c22p all c22p > 40  DATA -- MC  DATA -- MC 14<c23p<40 c23p< 14  DATA -- MC  DATA -- MC MC KS 3p0, BR=1.4x10-5 Normalization with the mean values of the coefficients

  25. The track veto MC SignalDATAMC bkg c22p all c22p > 40 14<c23p<40 c23p< 14 All events with tracks from IP are rejected rPCA < 4 cm ; |zPCA| < 10 cm MC signal, BR(KS3p0)=1.4x10-5

  26. The topological DECUT -- MCBG no 2fitcut  MCBG 2fit < 30  MCBG 2fit + TRKveto  MCSIG DECUT < 10 MeV After finding the four photons satisfying the kinematics of KS2p0, the residual energy of the KS is measured: E(Ks) = Eks- Eg • Summarizing: • c2FIT<30 • TRKveto • Sbox

  27. DATA/MC evaluated in Signal and control boxes varying the cut on the kin. Fit: • c2FIT = 500, 400, 300, 200, 100 • No dependence observed as a function of this cut Syst.error on BKG Syst1 =  9% (Calibration) Syst2 =  10% (Data/MC) Systot =  14 % Analysis efficiency and bkg systematics Sample of 10 Kevents KS 3p0 e3p = ( 21.30.7stat 0.3syst )

  28. Optimization of UL • We have optimized the UL by MC looking at 4 different • parameters: • c2FIT • c22p (both sides) • c23p • DECUT • The best choice of the cuts is the following (CUTMAX): • c2FIT < 31 • 14 < c22p < 60 • c23p < 3.7 • DECUT > 37 MeV • Optimization is done by minimizing the expected 90% CL • upper limit (ref. J.F.Grivaz, F. Le Diberder LAL 92-37) • All is done varying cuts on MC only.

  29. NA48 interference function K0 K0 Dilution factors KL decay KS decay Interference KL-KS

  30. Related parameters • The more conservative approach is to give ata000a phase which • maximizeIm(D)000: • Because there are 2 opposite values, we obtain a range for • |Im(D)|000@ 90% C.L.: Im(D)000 KLOE Im(D)000 CPLEAR Im(D)pln This value is obtained using only unitarity, and increases the precision on CPT test. Im(D)00 PDG 03 Im(D)+- x10-5

More Related