1 / 11

Measurements:

Measurements: . Every measurement has UNITS. Every measurement has UNCERTAINTY. Accuracy and Precision in Measurements. Accuracy: how close a measurement is to the accepted value. Precision: how close a series of measurements are to one another or how far out a measurement is taken.

myron
Télécharger la présentation

Measurements:

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Measurements: Every measurement has UNITS. Every measurement has UNCERTAINTY.

  2. Accuracy and Precision in Measurements Accuracy: how close a measurement is to the accepted value. Precision: how close a series of measurements are to one another or how far out a measurement is taken. A measurement can have high precision, but not be as accurate as a less precise one.

  3. Significant Figures are used to indicate the precision of a measured number or to express the precision of a calculation with measured numbers. In any measurement the digit farthest to the right is considered to be estimated. 0 1 2 2.0 1.3

  4. Sig. Fig. Rules (with measurements): All non-zero digits are significant. Zeros at the end of a measurement? scientific notation: 5000 5000 5000 5000 5000.0 5000.00 5 x 103 5.0 x 103 5.00 x 103 5.000 x 103 5.0000 x 103 5.00000 x 103

  5. Zeros at the beginning a number are not significant. 0.005 0.0050 0.00500 0.00505 Counted numbers and definitions (2.54 cm = 1 inch) are considered to be exact and have no effect on the number of sig. figs. reported in calculations with measurements.

  6. Calculations with sig. Figs. Addition and subtraction: Look at places! 3.63 cm 13.129 cm +123.1 cm 139.859 cm = 139.9 cm significant to the 0.1 place

  7. Measurement Calculations with scientific notation. Addition/subtraction: must be placed into the same notation. (2.3 x 103) + (3.2 x 104) = 0.23 x 104 +3.2 x 104 3.43 x 104 = 3.4 x 104

  8. Calculations with Sig. figs. Multiplication and division (measurements): You must be able to count. 2.734 cm x 5.2 cm x 8.1294 cm = 115.5740539 cm3 4 s.f. 2 s.f. 5 s.f. written as 120 cm3 2 s.f.’s

  9. 1. The term that is related to the reproducibility (repeatability) of a measurement is a. accuracy. b. precision. c. qualitative. d. quantitative. e. property. Let’s take a “Quiz” b. precision. 2. The number of significant figures in the mass measured as 0.010210 g is a. 1. b. 2. c. 3. d. 4. e. 5. e. 5.

  10. 3. The number of significant figures in 6.0700 x 10-4… is a. 3. b. 4. c. 5. d. 6. e. 7. c. 5. 4. How many significant figures are there in the value 0.003060? a. 7 b. 6 c. 5 d. 4 e. 3 d. 4

More Related