1 / 1

Important Service Bulletin for LD-4050W / LD-14AW Dishwashers - Parts Update

This service bulletin outlines critical changes to the heater case and sump assembly parts for LD-4050W and LD-14AW dishwashers, specifically affecting models produced from March 2004 onward. It provides details on part number substitutions, including the heater case assembly and sump assembly, and introduces the concept of a turbidity sensor for enhanced energy efficiency. Note the specifications for replacing parts to ensure optimal performance and sensor functionality. Effective date of these updates is February 24, 2004.

napua
Télécharger la présentation

Important Service Bulletin for LD-4050W / LD-14AW Dishwashers - Parts Update

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SVC Bulletin (Heat Case Asm) 24-Feb-2004 1 .Product type : Dish Washer 2. Model : LD-4050W/ LD-14AW Series 3. Applicable Serial No. : Mar(04) production lot. 4. Effective Date : 24 ,Feb., 2004 5. Exchanging / Substitution of Parts : - Heater Case Assy, & Sump Assy Subject : The changes to part numbers were made after Mar, 2004 production lot. Before Feb, 2004 After Mar, ‘2004 P/No. 3111ED2002C 3111ED2002V (or 3111ED2002R) Part Heat Case Assy Remark There is a Turbidity Sensor in 3111ED2002C, but not in 3111ED2002V (or R) - Part number for Heater Turbidity sensor is : #6501ED2002A SumpAssy 3485ED1001E 3485ED1001R - Does not have a Turbidity sensor. • Has a Turbidity sensor(#6501ED2002B) Sump Turbidity sensor * The sensor’s mounting cap has been changed to Accommodate the sump’s mounting * Part number for Sump Turbidity Sensor is: 6501ED2002B 1.when replacing the Sump Assy : #3485ED1001R can be substituted for 3485ED1001E as there is no need to connect a turbidity sensor. 2. When replacing the Heater Case Assy (3111ED2002C) , If stock of 3111ED2002C is not available 1) Replace both 3111ED2002V (heater case Assy) and 3485ED1001R (Sump Assy) 2) Or just replace to 3111ED2002V :and leave turbidity sensor disconnected. - the program defaults to the Auto (1) course, if ‘Auto’ is selectedRemark : Function of the Turbidity sensor is applied for saving Energy, when selecting auto course, the course will be taken Auto(1), Auto(2), Auto(3) as the pollution level, however, in case that the sensor is out of order or disconnected , the program will take the Auto (1) course. SVCmethod

More Related