1 / 19

Liquid Vials

Liquid Vials. To begin, make sure you have the proper supplies: vial of solution, syringe and needle assembly, and alcohol pad. . ( NEED TO ADD ALCOHOL PAD TO THIS PIC ). Remove dust cover from vial. Open alcohol pad. Wipe rubber stopper with alcohol pad. .

nash
Télécharger la présentation

Liquid Vials

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Liquid Vials

  2. To begin, make sure you have the proper supplies: vial of solution, syringe and needle assembly, and alcohol pad. (NEED TO ADD ALCOHOL PAD TO THIS PIC)

  3. Remove dust cover from vial.

  4. Open alcohol pad.

  5. Wipe rubber stopper with alcohol pad. Avatar: Be sure to allow the alcohol to dry. The desiccant effect of the evaporated alcohol is what destroys most microorganisms.

  6. Pull an amount of air a little less than or equal to the amount of medication needed from the vial. Tip: Remember, do not remove the cap yet.

  7. Uncap the needle. AIR SHOULD BE IN THIS SYRINGE SO THE PLUNGER SHOULD BE PULLED BACK TO AN AMT EQUAL TO THE MED NEEDED FROM THE VIAL

  8. Place the needle tip on the rubber stopper with the bevel facing up. The needle is to be held at a slight angle.

  9. What’s wrong with this situation? This needle is at too much of an angle and bent. Skjfd;lkdsf Jdsf;lksjf

  10. Puncture the rubber stopper by pressing down on the angled needle pushing the needle straight into the vial.

  11. Inject the air in the syringe into the vial.

  12. Pull solution from the vial into the syringe. The positive pressure created by the injected the air should make it easier to pull solution from the vial.

  13. What’s wrong with this situation? Holding vial incorrectly…

  14. Withdraw the amount of solution needed from the vial Make sure to keep the needle in the solution or you will get air bubbles.

  15. Inject any air bubbles back into the vial.

  16. Withdraw the needle from the vial.

  17. Recap the needle.

  18. Avatar: According to your work area and the facility’s policies and procedures, verify that you have used the correct drug and obtained the correct dosage of the medication.

  19. You can practice these steps as many times as needed. When you think you can do this procedure on your own, choose the On Your Own Activity. NOTE: Feedback for wrong answers: three X marks. They can’t continue. Suggestion box that they need more practice.

More Related