1 / 8

Articulators and mounting

Articulators and mounting. Dr. Ali Ehsan Kareem B. D. S., M. Sc./prosthodontist. The Articulator : is a mechanical device which represents the T.M.J and jaw members to which maxillary and mandibular casts may be attached to simulate mandibular movements. Requirments of articulators:.

ncarrier
Télécharger la présentation

Articulators and mounting

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Articulators and mounting Dr. Ali Ehsan Kareem B. D. S., M. Sc./prosthodontist

  2. The Articulator: is a mechanical device which represents the T.M.J and jaw members to which maxillary and mandibular casts may be attached to simulate mandibular movements. Requirments of articulators: Purposes of an articulator:

  3. Classification of articulators: 1.plain line or simple hinge type or non adjustable or class I: • like slab articulator. 2.mean value type with fixed condylar path and incisal incline or class II articulator: • like hall articulator. 3.semi-adjustable articulator or class III • like dentatus and hanau models. 4.fully adjustable or class IV: • like denar model.

  4. Face-bow:is a caliper-like instrument used to record the relationship of the maxillary arch to the condyles or TMJ, then transfer this relationship to the articulator. Components of the face-bow: 1. Fork:the part that connects between the occlusion rims and the face bow

  5. 2.Condylar rods: This part contact the skin over T.M.J 3.U-shaped frame: extend from the region of T.M.J to a position (5-7.5cm) in front of the face

  6. Mounting Laboratory procedure: 1. The articulator should be clean. 2. The incisal pin flushed with the upper member of the articulator. 3. the incisal guide table at zero degree. 4. The mounting table properly fixed to the articulator. 5. Determine the midline of the cast. 6. With the wax knife 3 or 4 cuts are made on the base of upper and lower casts. 7. Alignment midline of upper bite rim and cast to the center of the mounting table.

  7. 8. Upper bite rim secured to the mounting table. 9. Enough space present between the cast and the upper member of articulator. 10. Thick creamy mix plaster is pored over the base of upper cast, then the upper member closed until the incisal pin touches the incisal table. 11. Then lower cast is mounted after taking centric relation of the mouth. 12. Upper and lower bite rim should be secured together by wax; lower bite rim should be secured to the lower cast 13. Care should be taken that there is no posterior interference between upper and lower casts.

  8. Errors of mounting: 1. The record base is not properly secured to the cast. 2. Interference the casts posteriorly. 3. The incisal pin doesn't touch the incisal table 4. Wrong alignment the midline of the articulator with that of the casts and the bite rims. 5. Movement the casts during mounting. 6. Dimensional change in plaster mounting.

More Related