1 / 33

Solubility Equilibria

Solubility Equilibria. AP Chemistry Chapter 15b. Solubility. Substances are soluble in varying degrees. Salt and sugar are both soluble CaSO 4 is less soluble in hot water. It forms protective coating for tubes in boilers.

neila
Télécharger la présentation

Solubility Equilibria

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Solubility Equilibria AP Chemistry Chapter 15b

  2. Solubility • Substances are soluble in varying degrees. • Salt and sugar are both soluble • CaSO4 is less soluble in hot water. It forms protective coating for tubes in boilers. • BaSO4 has very low solubility. It is used in gastrointestinal x-rays. • Nearly all salts that dissolve in water can be considered to dissociate 100%

  3.  Ca2+ + 2F- CaF2  CaF2 Ca2+ + 2F-  As it begins to dissolve, the ions are formed. When a solid is first added to water, no ions are present.  Ca2+ + 2F- CaF2 As concentrations of ions increase, it is more and more likely that these will collide and re-form the solid. Ultimately, a state of dynamic equilibrium will be reached. The solution is said to be saturated.

  4. Molar Solubility • The amount of a solid which dissolves is expressed in moles per liter. • Calculations involving Ksp are divided into 3 categories: • Calculate Ksp from solubility data • Calculate solubility from Ksp • Problems with precipitation.

  5. K = [Ca2+][F-]2 [CaF2]  CaF2(s) Ca2+ + 2F-  For the saturated solution with CaF2 and a given temperature, the solubility product constant, Ksp, is: Ksp = [Ca2+][F-]2

  6. CuBr(s) Cu+ + Br-  Lots of solid 2.0x10-4 2.0x10-4 15.12 Copper(I) bromide has a measured solubility of 2.0x10-4 mol/L at 25oC. Calculate its Ksp value. Solid 0 0 -2.0x10-4 +2.0x10-4 +2.0x10-4 Ksp = [Cu+][Br-] Ksp = [2.0x10-4][2.0x10-4] Ksp = 4.0x10-8

  7. Bi2S3(s) 2Bi3+ + 3S2-  Lots of solid 2.0x10-15 3.0x10-15 15.13 Calculate the Ksp value for bismuth sulfide (Bi2S3) which has a solubility of 1.0x10-15 mol/L at 25oC. Solid 0 0 -1.0x10-15 +2.0x10-15 +3.0x10-15 Ksp = [Bi3+]2[S2-]3 Ksp = [2.0x10-15]2[3.0x10-15]3 Ksp = 1.1x10-73

  8. Cu(IO3)2(s) Cu2+ + 2 IO3-  Lots of solid x 2x 15.14 The Ksp value for copper(II) iodate, Cu(IO3)2, is 1.4x10-7 at 25oC. Calculate its solubility at that temperature. Solid 0 0 -x +x +2x Ksp = [Cu2+][IO3-]2 1.4x10-7 = x(2x)2 1.4x10-7 = 4x3 x = 3.3x10-3 mol/L

  9. Relative Solubilities We must be careful using Ksp values in predicting relative solubilities. Salts producing same # ions: AgI Ksp = 1.5x10-16 CuI Ksp = 5.0x10-12 CaSO4 Ksp = 6.1x10-5 List most soluble to least…. CaSO4 > CuI > AgI Salts producing different # ions: Sol in mol/L CuS Ksp = 8.5x10-45 Ag2S Ksp = 1.6x10-49 Bi2S3 Ksp = 1.1x10-73 9.2x10-23 5.0x10-17 1.0x10-15 List most soluble to least…. Bi2S3 > Ag2S > CuS

  10. Ag2CrO4(s) 2 Ag+ + CrO42-  Lots of solid .100+2x x Common Ion Effect Find the solubility of Ag2CrO4 (Ksp 9.0x10-12) in solution with .100 M AgNO3. Solid .100 0 -x +2x +x Ksp = [Ag+]2[CrO42-] 9.0x10-12 = (.100+2x)2 x x = 9.0x10-10 mol/L (in pure water, solubility is 1.3x10-4 mol/L)

  11. CaF2(s) Ca2+ + 2 F-  15.15 Calculate the solubility of solid CaF2 (Ksp = 4.0x10-11) in a 0.025 M NaF solution. Lots of solid x .025 + 2x Ksp = [Ca2+][F-]2 4.0x10-11 = (.025+2x)2 x x = 6.4x10-8 mol/L

  12. pH and Solubility • In the dissociation Mg(OH)2(s) Mg2+ + 2OH- • The addition of OH- ions (rise in pH) forces equilibrium to the left • The addition of H+ ions (drop in pH) forces equilibrium to the right • And has the added effect of making Mg(OH)2 (s)more soluble!

  13. Ag3PO4(s) 3Ag+ + PO43-  Let’s see just how that works…. Ag3PO4(s) is more soluble in an acidic solution PO43- reacts with H+ to form HPO42- …thus shifting the reaction…. …to the right…making Ag3PO4 more soluble. So adding H+ (lowering the pH) increases solubility of Ag3PO4. If X- is an effective base (HX is weak acid) the salt (MX) shows increased solubility in an acidic solution. Effective bases: HO-, S2-, CO32-, C2O42-, CrO42-

  14. Precipitates and Quantitative Analysis • We’ll now show how we will form solids from solutions. • We must decide if a solid will form when 2 solutions with ions are mixed. • Use ion product: Q=[Ca2+][F-]2 • Notice this is initial [ ], not equilibrium [ ] (Ksp)

  15. Unsaturated solution: • When the ion product < Ksp • No precipitate occurs • Saturated solution: • When the ion product = Ksp • No new precipitate occurs (equilibrium) • Supersaturated solution: • When the ion product > Ksp • Yes, a precipitate will occur.

  16. Ce(IO3)3(s) Ce3+ + 3IO3-  750mLCe(NO3)34.00x10-3 mmolCe(NO3)3=3 mmolCe(NO3)3 1 mL 1050mL 300mL KIO32.00x10-2 mmol KIO3 = 6 mmol KIO3 1 mL 1050mL 15.16 A solution is prepared by adding 750.0 mL of 4.00x10-3 M Ce(NO3)3 to 300.0 mL of 2.00x10-2 M KIO3. Will Ce(IO3)3 (Ksp 1.9x10-10) precipitate from this solution? Lots of solid 2.86x10-3 5.71x10-3 2.86x10-3 M Ce3+ 5.71x10-3 M IO3- Q = [Ce3+][IO3-]3 = (2.86x10-3)(5.71x10-3)3 Q = 5.32x10-10 Q > Ksp thus a precipitate will form

  17. Calculate the equilibrium concentration of Pb2+ and I- ions formed by mixing 100.0 mL of 0.0500 M Pb(NO3)2 and 200.0 mL of 0.100 M NaI. Assume PbI2 reacts to completion Pb2+(aq) + 2 I-(aq) PbI2(s) [Pb2+]o = 100.0 mL  .0500 mmol  1 = 1.67x10-2M mL 300 mL [I-]o = 200.0 mL  .100 mmol  1 = 6.67x10-2M mL 300 mL Determine if PbI2 (s) forms (Ksp=1.4x10-8) 100.0 mL  .0500 mmol = 5.00 mmol Pb2+ 1 mL 200.0 mL  .100 mmol = 20.00 mmol I- 1 mL Q = [Pb2+][I-]2 = 7.43x10-5 Q > Ksp so a ppt will form 5.00 mmol Pb2+ reacts with 10.00 mmol I- to form 5.00 mmol PbI2in 300 mL forming .0167M PbI2 After the complete reaction: 0 M Pb2+, 10.0 mmol I- in 300 mL (.0033 M I-) and .0167 M PbI2 formed.

  18. PbI2(s) Pb2+ + 2 I-  After the complete reaction: 0 M Pb2+, 10.0 mmol I- in 300 mL (.0033 M I-) and .0167 M PbI2 formed. .0167 0 .0033 -x +x +2x .0167-x x .0033+2x Ksp = 1.4x10-8 = x (.0033+2x)2 x = [Pb2+] = 1.3x10-5 [I-] ≈ 3.33x10-2 M

  19. Mg2+(aq) + 2F-(aq) MgF2(s)  150.0 mL  .0100 mmol  1 = 3.75x10-3 M Mg2+ 1 mL 400.0mL 250.0 mL  .0100 mmol  1 = 6.25x10-2 M F- 1 mL 400.0mL 15.17 A solution is prepared by mixing 150.0 mL of 1.00x10-2 M Mg(NO3)2 and 250.0 mL of 1.00x10-1 M NaF. Calculate the concentrations of Mg2+ and F- at equilibrium with solid MgF2 (Ksp=6.4x10-9). = 1.5 mmol Mg2+ = 25.0 mmol F- All 1.5 mmol of Mg2+ will react with 2(1.5) mmol F- leaving 22.0 mmol F- / 400.0 mL = 5.50x10-2M F- Q = [Mg2+][F-]2 = 1.46x10-5 Q > Ksp thus MgF2 will form Now MgF2 will dissociate slightly to reform Mg2+ and F-

  20. MgF2(s) Mg2+(aq) + 2F-(aq)  lots – x 0 + x 5.5x10-2 + x Ksp = 6.4x10-9 6.4x10-9 = x ( 5.5x10-2+ x)2 x = [Mg2+] = 2.1x10-6 M [F-] = 5.5x10-2 M

  21. Selective Precipitation • Mixtures of metal ions are separated with this method • Select the anion which forms a precipitate with only selected ion or ions • For example, in a mixture of Ba2+ and Ag+, select NaCl as AgCl forms a white precipitate but BaCl2 is soluble.

  22. 15.18 A solution contains 1.0x10-4 M Cu+ and 2.0x10-3 M Pb2+. If a source of I- is added gradually to this solution, will PbI2 (Ksp = 1.4x10-8) or CuI (Ksp=5.3x10-12) precipitate first? Specify the concentration of I- necessary to begin precipitation of each salt. Any [I-] > 2.6x10-3 will start the precipitation of PbI2. 1.4x10-8 = Ksp = [Pb2+][I-]2 1.4x10-8 = (2.0x10-3)[I-]2 [I-] = 2.6x10-3 M Any [I-] > 5.3x10-12 will start the precipitation of CuI. 5.3x10-12 = Ksp = [Cu+][I-] 5.3x10-12 = (1.0x10-4)[I-] [I-] = 5.3x10-8 M CuI will precipitate first!

  23. Sulfide Ions • Sulfide ions are often used to precipitate with since sulfide salts have very different solubilities. • A solution with 10-3 M Fe2+ and 10-3 M Mn2+… • FeS (Ksp=3.7x10-19) is much less solubile than… • MnS (Ksp = 2.3x10-13). • Adding S2- to the mixture will precipitate Fe2+ and leave Mn2+ • H2S  H+ + HS- Ka1=1.0x10-7 • HS-  H+ + S2- Ka2=1.0x10-19 • Since HS- is so very weak, S2- has a very high affinity for protons.

  24. HS- H+ + S2- Ka2 = 1.0x10-19  In a mixture with Cu2+ , Hg2+ , Mn2+ , Ni2+ CuS Ksp = 8.5x10-45 HgS Ksp = 1.6x10-54 MnS Ksp = 2.3x10-13 NiS Ksp = 3.0x10-21 Adding H2S to solution will make solution acidic… …attracted to Cu & Hg so they precipitate Then adding OH- to raise pH (more basic) forces more production of S2- (drives reaction to the right) …resulting in more S2- thus precipitating Mn2+ and Ni2+

  25. Qualitative Analysisfor the following cations, separate into 5 groups: K+ Hg22+ NH4+ Ag+ Cd2+ Mn2+ Pb2+ Hg2+ Sn2+ Co2+ Ba2+ Bi3+ Cu2+ Zn2+ Mg2+ Ca2+ Ni2+ Fe2+ Al3+ Na+ Cr3+

  26. Ag+ Pb2+ Hg22+ Precipitate out when dilute HCl is added Hg2+ Cd2+ Bi3+ Cu2+ Sn2+ Precipitate out when H2S is added Co2+ Zn2+ Fe2+ Ni2+ Mn2+ Cr3+ Al3+ Precipitate out as you make solution basic then add more H2S Precipitate out as insoluble hydroxides Mg2+ Ca2+ Ba2+ Precipitate by the addition of CaCO3. Na+ K+ NH4+ Are all soluble but can be distinguished by characteristic colors produced during flame test.

  27. Complex Ions and Their Equilibria • Complex Ion: a metal ion which becomes strongly attached to anions or neutral molecules—the resulting “complex ion” has an overall charge. • The number of ligands attached to the central atom is called the coordination number. • The coordination number is usually 2, 4, or more commonly, 6 • Cu(H2O)42+ • Al(H2O)63+ • Co(H2O)62+

  28. Cu(NH3)42+ Cu2+ + 4NH3  Kinst = [Cu2+][NH3]4 [Cu(NH3)42+] Kform = [Cu(NH3)42+] [Cu2+][NH3]4 Dissociation equation for Cu(NH3)42+: The equilibrium constant for this reaction is called an instability constant, Kinst. The reciprocal of Kinst is called Kform which is equal to Keq. When a complex ion is formed in a solution of an insoluble salt, it reduces the concentration of free metal ion…as a result, more solid must dissolve.

  29. [NH3]o = 100.0 mL  2.0 mmol NH3  1 = 1.0 M 1 mL 200 mL  NH3 + H2O NH4+ + OH-   Ag+ + NH3 Ag(NH3)+ K1 = 2.1x103   Ag(NH3)+ + NH3 Ag(NH3)2+ K2 = 8.2x103  [Ag+]o = 100.0 mL  1x10-3 mmol Ag+  1 = 5.0x10-4M 1 mL 200 mL Consider a solution prepared by mixing 100.0 mL of 2.0 M NH3 with 100.0 mL of 1.0x10-3 M AgNO3. All of the Ag+ will be attracted to the Lewis base, NH3 and leave 5.0x10-4M Ag(NH3)2+ and ~1.0M NH3 unreacted (1.0 - .001) Before any reaction occurs, the major species are Ag+, NO3-, NH3 and H2O. This reaction might occur but since Kb = 1.8x10-5, we should be able to ignore the NH3 used up. with K1=2.1x103 & K2=8.2x103 so big, both go essentially to completion so the net reaction is used.

  30. Ag+ + 2NH3  Ag(NH3)2+ K2 = [Ag(NH3)2+] [Ag(NH3)+][NH3] K1 = [Ag(NH3)+] [Ag+][NH3]  Ag+ + NH3 Ag(NH3)+ K1 = 2.1x103   Ag(NH3)+ + NH3 Ag(NH3)2+ K2 = 8.2x103  Stoichiometry: 0 1.0 5.0x10-4 5.0x10-4 8.2x103 1.0 6.0x10-8 2.1x103 1.0 NH3≈ 1.0 M Ag(NH3)2+ = 5.0x10-4 M Ag(NH3)+ = Ag+ = 6.1x10-8 M   2.9x10-11 M

  31. Calculate the concentrations of Ag+, Ag(S2O3)-, and Ag(S2O3)23- in a solution prepared by mixing 150.0 mL of 1.00x10-3 M AgNO3 with 200.0 mL of 500 M Na2S2O3. The stepwise formation equilibria are: Ag+ + S2O32- Ag(S2O3)- K1=7.4x108 Ag(S2O3)- + S2O32- Ag(S2O3 )23- K2=3.9x104     [Ag+]o = 150.0 mL  1x10-3 mmol Ag+  1 = 4.29x10-4M 1 mL 350 mL [S2O32-]o = 200.0 mL 5.0 mmol S2O32-  1 = 2.86 M 1 mL 350 mL [S2O32-]o >>[Ag+]o and K1 and K2 are big, both formation reactions go to completion Before any reaction occurs, find Ag+ and S2O32- Ag+ + 2S2O32- Ag(S2O3)23- Stoichiometry: 0 ≈2.86 4.29x10-4

  32. Ag+ + 2S2O32- Ag(S2O3)23-  Ag+ + S2O32- Ag(S2O3)- K1=7.4x108 Ag(S2O3)- + S2O32- Ag(S2O3 )23- K2=3.9x104   K2 = 3.9x104 = [Ag(S2O3)23-] [Ag(S2O3)-][S2O32-]  K1 = 7.4x108 = [Ag(S2O3)-] [Ag+][S2O32-] Stoichiometry: 0 ≈2.86 4.29x10-4 4.29x10-4 2.86 3.8x10-9 2.86 S2O32-≈ 2.86 M Ag(S2O3)23- = 4.29x10-4 M Ag(S2O3)- = Ag+ = 3.8x10-9 M 1.8x10-18 M

  33. The End

More Related