1 / 28

BLR’s Safety Training Presentations

BLR’s Safety Training Presentations. Abrasive Grinding Wheels 29 CFR 1910.215, 29 CFR 1910.243. Goals. Types of grinders, OSHA standards, hazards PPE, inspections, safe work practices Quiz. Types of Grinders. Bench or pedestal grinders Portable grinders

nellie
Télécharger la présentation

BLR’s Safety Training Presentations

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. BLR’s Safety Training Presentations Abrasive Grinding Wheels29 CFR 1910.215, 29 CFR 1910.243

  2. Goals • Types of grinders, OSHA standards, hazards • PPE, inspections, safe work practices • Quiz

  3. Types of Grinders • Bench or pedestal grinders • Portable grinders • Edge or circumference used for grinding • Flat side of wheel used for grinding

  4. Types of Wheels • Cutting off wheel • Abrasive wheel • Organic wheel • Inorganic wheel • Vitrified wheel • Wire brush and buffing wheels

  5. Wheel Speed • SFPM • 0.262 X (diameter in inches) X (RPM) • 12” wheel at 1,000 RPM = 3,144 SFPM • 24” wheel at 1,000 RPM = 6,288 SFPM

  6. OSHA Standards • Design specifications for wheels and guards • Proper guarding • Safe operations • Repairs and maintenance • Inspection of equipment

  7. OSHA Violations • Ranks high among most frequently violated standards • Abrasive wheel exposure adjustments • Abrasive wheel machinery work rests

  8. Grinding Wheel Hazards • Hand injuries from the moving wheel • Eye injuries from flying chips • Hearing damage from noise • Breathing hazard from dusts and fumes

  9. Typical Guarding • Heavy metal enclosure • Cover spindle, nut, and flange • Side guards cover 75 percent of wheel diameter • Adjustable tongue guard within 1/4”

  10. Band-Type Guards • Flat side of wheel is used to grind • Back of wheel is guarded • Guard surrounds edge of wheel • Inside of band is free of projections • Inside edge is < 1” from edge of wheel • Wheel protrudes slightly beyond guard

  11. Flanges • Used to mount most abrasive wheels • Transmit torque from spindle to wheel • At least 1/3 wheel diameter • Made of strong and rigid material • Replace when bearing surface becomes worn, warped, or damaged

  12. Blotters • Are compressible washers • Are used between flanges and wheel surface • Ensure uniform distribution of flange pressure • Cover entire contact area of flange

  13. Work Rest • Supports material being worked on • Is adjustable for wheel wear • Must be < 1/8” away from wheel • Large gap could cause jamming

  14. Work Rest (cont.) • Positioned just below wheel’s center • Secured in position • Replaced when worn or damaged

  15. Goals • Types of grinders, OSHA standards, hazards • PPE, inspections, safe work practices • Quiz

  16. PPE • Glasses and face shield • Dust mask • Hearing protection • Gloves

  17. No Loose Clothing, Jewelry, and Long Hair • Oversized shirts or sweatshirts • Unzipped shirts, sweaters, or coats • Long sleeves with unbuttoned cuffs • Dangling jewelry • Long hair

  18. Replacing Grinding Wheels • Disconnect power source • Be sure wheel speed is greater than machine’s maximum speed • Handle wheels carefully • Inspect wheel for cracks or damage

  19. Ring Test • Check for hidden wheel cracks • Use light, nonmetallic tool • Gently tap dry, clean wheel • Metallic “ping” means wheel is OK • Dull thud means wheel is cracked

  20. Inspect the Grinder • Grinder is securely mounted • Wheel is mounted securely • Guards are in place • Power transmission motor is covered • Work rest is positioned correctly

  21. Inspect the Grinder (cont.) • Wheel is evenly worn • Wheel has no nicks, cuts, or cracks • Work area is clear of combustibles • Electrical connections are in good condition • Dust collection system is working

  22. Using the Grinder • Turn on the wheel while standing off to the side • Allow the grinder to come to full speed • Stand in a balanced position • Keep firm control of the grinder or material • Do not extend yourself or overreach

  23. Goals • Types of grinders, OSHA standards, hazards • PPE, inspections, safe work practices • Quiz

  24. Summary • Understand grinding hazards • Adjust tongue guard • Adjust work rest • Inspect grinder and wheel • Wear PPE

  25. Quiz 1. What are the four primary hazards associated with grinders? 2. Name one of the items that frequently violates OSHA standards. 3. When is it safe to wear gloves when using a grinder? 4. How close must the tongue guard be to the wheel? 5. How close must the work rest be to the wheel?

  26. Quiz (cont.) 6. What should you do before performing any maintenance on a grinder? 7. The wheel’s rated speed must be greater than the spindle’s max speed. True or False 8. Describe how to do the “ring test.” 9. How should you test the wheel before using the grinder? 10. What should flanges be inspected for?

  27. Quiz Answers 1. Eyes hit by particles, hands touching grinder, breathing dust, noise 2. Work rest not adjusted right, wheel exposure not adjusted right 3. Only when hands are positioned far away from grinding wheel 4. Within 1/4” 5. Within 1/8”

  28. Quiz Answers (cont.) 6. Disconnect the power source 7. True 8. Tap clean wheel with nonmetallic tool, listen for “ping” sound 9. Stand to the side and turn the wheel on 10. Warping of the bearing surface

More Related