Connecting to your Netgear Orbi Wi-Fi System - www.orbilogin.net

1. Connecting to your Netgear Orbi Wi-Fi System - www.orbilogin.net Before performing Orbilogin.com Setup via www.orbilogin.net orbi login address, it is recommended to power cycle your wireless network including your Modem and any existing home router. The power cycling can be done powering off and then power on the devices. ●Unplug your modem from the connected power source or remove the modem’s battery backup it’s using. ●Connect the Ethernet cable from your modem to the orbi login netgear kb at the yellow internet port of your Netgear Orbi router. ●Connect the power adapter into Orbi Router to the power source for orbilogin.net login (orbi login address). ●Be certain that the power LED status is lit up after you have powered on your netgear Orbi router for orbilogin.com setup. ●Position your Netgear Orbilogin satellite closer to the Orbi router in the central place of your house to receive best Wi-Fi coverage. ● Also, connect the Orbi satellite to a power source. ●Wait for the status internet LED on the Orbi satellite to show solid blue light. ●If status LED light is magenta, move your Orbilogin satellite closer towards the Orbi router to complete the www.orbilogin.net login. Orbi login netgear kb. ●Establish connection between the computer and the Orbi router with a wired Ethernet connection or by using the wireless/wifi connection. ●Connect to the Orbi login netgear kb router’s network by searching for it.

2. ●Input the default Orbilogin.net password printed on the Orbi router’s label. ●Navigate to www.orbilogin.net orbi login address from your Computer’s web browser. ● You enter the Netgear orbi login page of the orbilogin router. ●Login to Netgear Orbi router using the Default Netgear orbi login credentials with www.orbilogin.net orbi login details. ●The above orbi login address and password steps will open the Netgear Orbi genie page. ●Select Add Orbi Satellite to add the Orbilogin satellite to your Netgear Orbi Wi-Fi system. ●The ‘Place Your Satellite page’ appears. ●Follow the instructions by Netgear Genie on placing your Orbilogin satellite in your house. ●Connect the Orbi satellite to a power source and let its status Power LED to light. ●Click on the Next button on orbilogin.com setup screen. ●Wait for a few minutes for the satellite’s ring LED to show solid white light. ●To allow router and satellite sync, press the Sync button on the satellite with indication by the satellite’s ring LED pulsing white. ●Click on the Sync button in the orbilogin.net setup router’s web interface to sync with the orbi satellite. ●Following the sync, The orbi login satellite’s ring LED may give status light as one of the following colors for almost three minutes and then turns off: ●Blue status light indicates successful sync. Orbilogin.com setup ●Amber status light shows fair connection on sync.orbilogin.com setup ●Magenta status light shows failed sync, and you must move your orbilogin satellite closer to your orbi router. The orbilogin.com setup completes with Orbi router and satellite sync with each other and forms working Orbi Wi-Fi system using orbilogin.net orbi login address for setup and sync.