1 / 13

Spread Spectrum Techniques for Wireless Communication

Spread Spectrum Techniques for Wireless Communication. Axel Acuna. Spread Spectrum. Methods by which a signal generated with a particular bandwidth is deliberately spread in the frequency domain, resulting in a signal with a wider bandwidth. These techniques are used for a variety of reasons:

nitza
Télécharger la présentation

Spread Spectrum Techniques for Wireless Communication

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Spread Spectrum Techniques for Wireless Communication Axel Acuna

  2. Spread Spectrum • Methods by which a signal generated with a particular bandwidth is deliberately spread in the frequency domain, resulting in a signal with a wider bandwidth.

  3. These techniques are used for a variety of reasons: • Establishment of secure communications • Increasing resistance to natural interference, noise and jamming • Prevent detection • Limit power flux density

  4. How It Works? • Spread spectrum uses wideband, noise-like signals that are hard to detect, intercept, or demodulate. • Spread-spectrum signals are harder to jam (interfere with) than narrow band signals.

  5. This technique: • decreases the potential interference to other receivers (anti-jam, or AJ). • while achieving privacy low probability of intercept (LPI).

  6. Spread spectrum generally makes use of a sequential noise-like signal structure to spread the normally narrowband information signal over a relatively wideband (radio) band of frequencies. • The receiver correlates the received signals to retrieve the original information signal. 

  7. Direct sequence and frequency hopping are the most commonly used methods for the spread spectrum technology. • DSSS: Direct Sequence Spread Spectrum • FHSS: Frequency Hopping Spread Spectrum

  8. DSSS • The carrier of the direct-sequence radio stays at a fixed frequency. • Narrowband information is spread out into a much larger (at least 10 times) bandwidth by using a pseudo-random chip sequence. • Uses the same amount of transmit power and carry the same information as narrowband • The power density of the DSSS signal is much lower than the narrowband signal, making it more difficult to detect.

  9. FHSS • FHSS achieves the same results provided by DSSS by using different carrier frequency at different time. • The receiver and the transmitter must be synchronized in time and frequency in order to ensure proper transmission and reception of signals.

  10. FHSS is better than DSSS radio when dealing with multipath. Since the FHSS does not stay at the same frequency.

  11. Questions?

More Related