1 / 16

B86 Pearson Square Balancing a Ration

B86 Pearson Square Balancing a Ration. Lesson Outline. Calculating amounts of feed needed Selecting feed ingredients Using the Pearson square. Pearson Square. The Pearson square is a tool used for simplifying and balancing rations.

noah-fuentes
Télécharger la présentation

B86 Pearson Square Balancing a Ration

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. B86 Pearson Square Balancing a Ration

  2. Lesson Outline • Calculating amounts of feed needed • Selecting feed ingredients • Using the Pearson square

  3. Pearson Square • The Pearson square is a tool used for simplifying and balancing rations. • It shows the proportions or percentages of two feeds to be mixed together to give a percentage of the needed nutrient.

  4. Calculating Feed Amounts • If pigs have an industry average feed conversion ratio of 3.5, and you purchase a 50 lb weaner pig and want him to weight 250 pounds by the fair, how many pounds of feed is it going to take to raise this pig to 250 pounds? • 250 pound finished hog minus 50 pound weaner = 200 pounds of gain. • 200 pounds X 3.5 = 700 lbs of feed. • A feeding standards table shows that an 18% crude protein ration is needed.

  5. Select the Feed Ingredients • Feeds should be selected based on the price of the feed, the availability of the feed, and the desirable nutrients found in the feed. • Lets say corn and soybean meal (SBM) are selected as feeds. • A feed composition table indicates: • Corn has 8.9% crude protein • SBM has 44.4 % crude protein

  6. Using the Pearson Square • Use the Pearson square to calculate how much corn and soybean meal need to be mixed together to make 700lbs. of feed and still achieve 18% crude protein.

  7. Step 1 • Draw a 1 to 2 inch square. Place diagonal lines across the square.

  8. Step 2 • Write the percentage of crude protein needed by the animal in the center of the square where the diagonal lines cross. • (You would have to look that information up on a feed chart for that animal.) 18.0

  9. Step 3 Write the feeds to be used at each corner. The primary feed always goes in the bottom left. The supplementary feed in the top left. (In this case it doesn’t matter. If you were feeding hay and corn, hay would be the primary feed.) Place the percent of crude protein in the feeds after the name of the feed. Corn 8.9% SBM 44.4% 18.0

  10. Step 4 Take the protein level of each feed ingredient and subtract it from the amount of protein needed in the center of the box and record it in the opposite corner. 44.4 – 18= 26.4 18 – 8.9 = 9.1 Corn 8.9% 26.4 parts corn SBM 9.1 parts 44.4% SBM 18.0

  11. Pearson Square Note: A negative number is undesirable, so if the protein in the feed is higher than what is needed, just subtract what is needed from the feed. However, if the protein in the feed is a smaller number than what is needed, subtract what is needed from what is in the feed. 44.4 – 18= 26.4 18 – 8.9 = 9.1 Corn 8.9% 26.4 parts corn SBM 9.1 parts 44.4% SBM 18.0

  12. Step 5 • The numbers at the two right corners are parts of the two feed ingredients that are needed. • 26.4 parts corn • +9.1 parts soybean meal (SBM) • 35.5 total parts

  13. Pearson Square 18.0 Corn 26.4 parts corn 8.9% 35.5 total parts SBM 9.1 parts SBM 44.4% 35.5 total parts

  14. Step 6 • The percentage of each feed needed in the ration can be found by dividing the number of parts by the total parts, then multiply by 100. • 26.4/ 35.5 = .744 x 100 = 74.4% corn • 9.1/ 35.5 = .256 x 100 = 25.6% sbm

  15. Pearson Square 18.0 Corn 26.4 parts corn 8.9% 35.5 total parts 74.4% SBM 9.1 parts SBM 44.4% 35.5 total parts 25.6%

  16. Step 7 • The amount of each feed ingredient for a large batch of feed is determined by multiplying the percentage of each by the total amount of feed desired. • Our batch of feed = 700lbs • 700lbs x .744 = 520.8lbs Corn • 700lbs x .256 = 179.2lbs SBM • 700lbs 0f feed @ 18.% Crude Protein

More Related