1 / 16

CHE/ME 109 Heat Transfer in Electronics

CHE/ME 109 Heat Transfer in Electronics. LECTURE 9 – GENERAL TRANSIENT CONDUCTION MODELS. GENERAL TRANSIENT MODEL. BASED ON THE CHANGE IN TEMPERATURE IN SYSTEMS WITH THE TRANSFER OF HEAT. LUMPED CAPACITANCE MODELS THE MODEL THAT APPLIES FOR TRANSIENT DEPENDS ON THE CONTROLLING RESISTANCE .

nysa
Télécharger la présentation

CHE/ME 109 Heat Transfer in Electronics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CHE/ME 109 Heat Transfer in Electronics LECTURE 9 – GENERAL TRANSIENT CONDUCTION MODELS

  2. GENERAL TRANSIENT MODEL • BASED ON THE CHANGE IN TEMPERATURE IN SYSTEMS WITH THE TRANSFER OF HEAT. • LUMPED CAPACITANCE MODELS • THE MODEL THAT APPLIES FOR TRANSIENT DEPENDS ON THE CONTROLLING RESISTANCE. • FOR SYSTEMS WHERE THE CONDUCTION RESISTANCE IS NEGLIGIBLE, THE TEMPERATURE OF A BODY CAN BE ASSUMED TO BE UNIFORM

  3. LUMPED CAPACITANCE • DETERMINATION OF THIS CONDITION IS OBTAINED BY TAKING THE RATIO OF THE RESISTANCE TERMS, THE BIOT NUMBER: • WHEN THE INTERNAL RESISTANCE (CONDUCTION) IS LESS THAT 10% OF THE EXTERNAL (CONVECTION) RESISTANCE,

  4. LUMPED CAPACITANCE • THE BIOT NUMBER IS THE VALUE THAT IS USED TO DETERMINE WHETHER THE INTERNAL RESISTANCE IS NEGLIGIBLE • THE VALUE USED FOR x IN THIS EQUATION IS BASED ON THE CHARACTERISTIC LENGTH

  5. HEAT BALANCE EQUATION FOR TRANSIENT STATES • “RATE OF HEAT TRANSFER TO THE BODY IS EQUAL TO THE CHANGE IN INTERNAL ENERGY IN THE SYSTEM”

  6. TRANSIENT HEAT BALANCE • INTEGRATING FROM t = 0 TO t AND T(0) TO T(t) YIELDS

  7. HEAT BALANCE EQUATION • THIS EQUATION HAS A DIMENSIONLESS TEMPERATURE FORM • FOR A CONSTANT Cp, THE FRACTION OF TOTAL CHANGE IN THE HEAT IN THE SYSTEM IS • THE MAXIMUM HEAT THAT CAN BE TRANSFERRED IS REPRESENTED BY

  8. ELECTRICAL ANALOG • Ω = OHMS, Ce = FARADS, E = VOLTS:

  9. TRANSIENT SYSTEM MODELS • WITH TEMPERATURE GRADIENTS IN THE SYSTEM • GENERAL FORM OF THE ONE DIMENSIONAL TRANSIENT HEAT TRANSFER EQUATION,AS APPLIED TO A PLANE WALL AS SHOWN IN FIGURE 4-11(a)

  10. TRANSIENT SYSTEM SOLUTIONS • GENERAL SOLUTION FOR THIS EQUATION ASSUMES THE FORM:

  11. TRANSIENT SYSTEM SOLUTIONS • THIS EQUATION IS SOLVED ANALYTICALLY BY SEPARATION OF VARIABLES: • THE SOLUTION TO THIS EQUATION IS TWO ODE”S OF THE FORM:

  12. TRANSIENT SYSTEM SOLUTIONS • SPECIFIC SOLUTIONS TO THIS TRANSCENDENTAL EQUATION RESULT DEPEND ON THE GEOMETRY OF THE SYSTEM, THE BOUNDARY CONDITIONS AND THE INITIAL CONDITIONS • THE CHARACTERISTIC SOLUTIONS ARE SUMS OF EIGENFUNCTIONS • THE NUMBER OF SIGNIFICANT TERMS DEPENDS ON THE BIOT NUMBER

  13. TRANSIENT SYSTEM SOLUTIONS • SOLUTIONS ARE CONVENIENTLY PRESENTED IN TABULAR OR GRAPHICAL FORM USING DIMENSIONLESS VARIABLES • TABLE 4-2 AND FIGURES 4-15 THROUGH 4-17 (HEISLER CHARTS) PROVIDE SOLUTIONS • PARAMETERS ARE • DIMENSIONLESS TEMPERATURE: • BIOT NUMBER: • FOURIER NUMBER (DIMENSIONLESS TIME):

  14. HEISLER CHARTS • GRAPHICAL TRANSIENT SOLUTIONS ARE TYPICALLY PROVIDED IN FIGURES FOR SYSTEMS OF PLANES, CYLINDERS AND SPHERES • TEMPERATURE IN THE CENTER OF THE SYSTEM (a) • TEMPERATURE DISTRIBUTION AT DIFFERENT LOCATIONS (DISTANCE) (b) • TOTAL HEAT TRANSFERRED, NORMALIZED WITH THE TOTAL THAT CAN BE TRANSFERRED (c)

  15. HEISLER CHARTS

  16. HEISLER CHARTS

More Related