1 / 20

Abstract

Abstract. Quadruple Magnets Tuning Tsyganov Aleksandr , Budker Institute of Nuclear Physics, Russia

oksana
Télécharger la présentation

Abstract

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Abstract Quadruple Magnets Tuning TsyganovAleksandr, Budker Institute of Nuclear Physics, Russia The tuning of quadruples within the production cycle of BINP is described. The procedure of preliminary adjustment harmonics with bronze inserts between the poles and fine tune with a nose pieces on the poles is shown. The relationship the geometric parameters of these elements with the quality of the magnetic field are presented. The main conclusion - except an understanding of what determines the quality of the magnetic field of quadruples the need for quick and precise measurement for the successful tuning and production magnets.

  2. BUDKER INSTITUTE OF NUCLEAR PHYSICSNOVOSIBIRSK, RUSSIA Quadruple Magnets Tuning A.Tsyganov

  3. First measure • Insert cooper-chromium bars • Selection length of nose pieces • Gluing nose pieces • Check again • Reassembly • Inspection removing and setting back nose pieces • Statistic tuned quadruple • Conclusions

  4. It is first measure a magnetic property of magnets inside technological cycle of produce quadruples. Measure provide without water cooling and with temporary electrical connections. The height of the magnet spacers must be greater than the rated on the 0.1-0.15mm On the results of this step, we can plan ways tune this magnet.

  5. Insertion cooper-chromium (bronze) bars changed a3 and b4. It step is necessary to obtain a3 and b4 within one unit. In addition insertions is need to achieve good reassembly.

  6. A3 and B4 changed by size of insertion. The insertion can be selected with step 5-10 microns. 9807-0016

  7. 9807-0016

  8. If the A3 has a slope in the measured range of currents we can tuned this slope by changing the length of the nose pieces. 9807-0026

  9. After the final adjustment of nose pieces made pinning them. Pinning is a mechanical operation with a some effort on the nose pieces and pole. Therefore need to glue nose pieces. This operation can last up to an hour, the time to start curing epoxy glue. Performed on the magnet without water with a temporary electrical switching on a coils and at low current (40A)

  10. The adjustment is made by shifts and turns. An example of settings a magnet pads 9804-0029

  11. After yoke and nose pieces pinning should check the setting of the magnet.

  12. All magnets pass through reassembly test

  13. 9804-0029

  14. 9804-0029

  15. 9804-0022

  16. 9804-0022

  17. Result measure tuned quadruple Result first measure harmonics

  18. A quality magnetic field of the quadruple is determined not only the correctness of the geometry, but no less quality materials.. • Fast and precise magnetic measure stand • Good team

More Related