1 / 8

in the name of allah

Lecture by : LT “Sayed Dawod karimi” dawodkarimi2007@gmail.com 0799560376. in the name of allah. For NMAA and Kardan University Faculty of Engineering. Lecture 8. Torsional Displacements 1. Learning Objectives At the conclusion of this lecture you should be able to:

olin
Télécharger la présentation

in the name of allah

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lecture by : LT “Sayed Dawod karimi” dawodkarimi2007@gmail.com 0799560376 in the name of allah For NMAA and Kardan University Faculty of Engineering

  2. Lecture 8 Torsional Displacements 1. Learning Objectives At the conclusion of this lecture you should be able to: • Analyze statically determinate cylindrical shafts in torsion.

  3. 2. Orientation • A key design parameter for many machine components is the angle of twist. A shaft with an excessive tendency to twist will not be able to perform its intended function. During this lecture we will investigate statically determinate torsional systems. Next lecture we will extend this theory to statically indeterminate systems.

  4. 3. Reading Assignment 7.4

  5. 4. Key Terms None.

  6. 5. Study Problems 7.9, 7.10, 7.16

  7. 6. Challenge Problems 7.19, 7.22

  8. End of lesson Question

More Related