1 / 14

MAIN 220 Industrial Rigging

MAIN 220 Industrial Rigging. Chris Miller. Wire Rope / Slings. Objectives Know difference between Wire and Rope Slings Know definitions of rigging principals. Wire Rope . Classification # strands # of wires per strand Wire Strength IPS EIP EEIP. FOR MORE INFO.

omar
Télécharger la présentation

MAIN 220 Industrial Rigging

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MAIN 220 Industrial Rigging Chris Miller

  2. Wire Rope / Slings • Objectives • Know difference between Wire and Rope Slings • Know definitions of rigging principals

  3. Wire Rope • Classification • # strands • # of wires per strand • Wire Strength • IPS • EIP • EEIP FOR MORE INFO... TCP TRAINING Preparing The Site (319)

  4. Factors Affecting Wire-rope • Bending • Sharp Corners • Angles of Force • Temperature • Heating • Corrosion and environment

  5. Sling Components • P. 36 p. 37 and p. 41 • Sling attachments • Where Used • Wear • Performance Issues FOR MORE INFO... TCP Equipment Installation Lesson 2,3,4 (318)

  6. Fiber Rope and Webbing Slings • Fiber Natural • Manila, boat rope • Grades 1-3 • P.51 • Synthetic • Nylon • Polyester • Polypropylene • Benefits • Length of fiber

  7. Factors Affecting Fiber-Ropes • Sharp Bends • Temperature • Moisture • Chemical Active Environments • Fittings and Splices

  8. Fiber Rope and Webbing Slings • Load Capacity for fibers • P. 57 color codes • Inspecting ropes • Heat damage • Apparent decomposing • Excessive wear • Worn Stitching • Cuts Tears Punctures • Distortion

  9. Industrial Hoists and Cranes • Lesson 5 Chain Hoist • P. 67 picture • Hook-Suspended • Trolley-Suspended • Overhead powered • Single reeving • Double reeving Safety overloading Limit Switches

  10. Principles and Practices • General Practices • Properly Trained • Rigger familiar with equipment • Rigger makes final say on safety • If signaling requires only 1 person in charge • Everyone as say to stop • Before moving determine where it is going • Load is free to move, not fastened to ground • Be sure everyone is clear of area • No shock loading • No riding • Do not move over where people are working • Never Leave suspended • Never work under load unless provisions to support are in place • Keep hands fingers out of the way

  11. Principles and Practices • Sling Operating Practices • Avoid sharp sling angles • Do not pull sling from under a load when load is resting on sling • Do not leave slings on the ground • Slings should be stored properly • Repair or remove damaged slings • Do not hammer metal mesh slings

  12. Principles and Practices • Turning a Load • Most difficult maneuver • Consider all options before moving • Determine center of gravity • Will blocks be required to support load • Can use • One-hook turn • Single-Sling Turn • Two-Hook turn • P.89

  13. Principles and Practices • Eye Bolts • Have pull ratings and must be remembered p.92 • Rigging thought Process • What is done with load • What tools are needed • Is capacity enough and adequate • How can the hook up be • What will happen with path of travel • What will happen once load is lifted • How will load be stored

  14. Scaffolds and Ladders • Eyebolts and Ratings • P. 92 picture • Lean against the wall

More Related