Download
slide1 n.
Skip this Video
Loading SlideShow in 5 Seconds..
Please register for product warranty at: meganet PowerPoint Presentation
Download Presentation
Please register for product warranty at: meganet

Please register for product warranty at: meganet

107 Vues Download Presentation
Télécharger la présentation

Please register for product warranty at: meganet

- - - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript

  1. WARNING: “Please read this manual thoroughly before using VME BioDrive™ A Data Security Mobility Solution OPERATING MANUAL www.vmebiodrive.com Please register for product warranty at: www.meganet.com

  2. INTRODUCTION Security – Data is encrypted and can only be accessed via fingerprint verification. Your fingerprint template cannot be accessed via PC Plug ‘n’ Play – Supports Win98/ME/2000/XP, MAC OS 8.6 and above, and Linux 2.4.x Convenience – Weighs only 27 grams and measures 7.5cm A - Fingerprint sensor B - Fingerprint protective metal C - Cover D - Enrollment Switch E - USB Interface F - Fingerprint Sensor Cover G - RED LED for fingerprint entry & data read/write H - LED for OK/NG fingerprint entry I - Fingerprint Enrollment LED J - For neck strap C G H I F A / \ \ \ / \ \ \ E B D J Pg 1

  3. RED LED blinks Enrollment LED ON Normal Setting HOW TO ENROLL FOR THE FIRST TIME? Set enrollment switch to NORMAL and insert into USB port. • Place finger on sensor NG/OK OK – Successful Enrollment NG – Error (Try Again) • Repeat enrollment for remaining 4 entries RED LED Pg 2

  4. NORMAL USAGE GREEN LED indicates fingerprint acceptance, RED LED indicates fingerprint rejection Place finger onto sensor for verification Normal Setting Pg 3

  5. Set Enrollment Switch to • Place finger onto sensor to clear previous fingerprint enrollments. • Repeat Steps 1 & 2 in page 2 Enrollment Setting HOW TO RE-ENROLL • CAUTION • Remove VME BioDrive ONLY after all 3 LEDs goes off. • Remember to slide Enrollment Switch back to “Normal” upon completion. Pg 4

  6. VME BioDrive Care VME BioDriveTM is a product of superior design and quality which should be handled with care. The suggestions below will help you enjoy this product for many years. • Clean the fingerprint sensor regularly with clean dry cloth. • Always replace the fingerprint cover to protect the fingerprint sensor from unintentional scratches. • Run Scandisk regularly to ensure the data integrity of VME BioDrive. • Always enroll a total of 5 fingerprints. • Keep it out of the reach of small children. Daily use: 1. Step 1: Place finger on sensor 2. Step 2: After authentication, slide finger away from sensor to clear finger print 3. Step 3: Close cover Step1: Down Step 2:Slide away Step 3:Close cover Pg 5