1 / 12

Ethylene Furnace PGC Applications

Ethylene Furnace PGC Applications. Ethylene Plant Cracking Furnace. Takes the feedstock and cracks the molecules in the presence of a catalyst at high temperatures Typically 12 -15 furnaces are used in a single ethylene plant

ophira
Télécharger la présentation

Ethylene Furnace PGC Applications

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Ethylene Furnace PGC Applications

  2. Ethylene Plant Cracking Furnace • Takes the feedstock and cracks the molecules in the presence of a catalyst at high temperatures • Typically 12 -15 furnaces are used in a single ethylene plant • The feedstock is typically naphtha (outside U.S.) and ethane / propane mix (within U.S.) • The stream is also run through a caustic wash system to remove H2S and CO2 between compression stages

  3. Improving Furnace Performance with PGC’s • Advanced control of the cracking furnace is critical to the ethylene plant's entire efficiency • “Over-cracking” leads to a premature furnace shutdown • Excessive coke formation on catalyst • “Under-cracking” is a direct reduction in overall production • ABB PGC’s provide the data to the plant's control system to help optimize the right balance for cracking severity

  4. Typical Cracking Furnace in a Ethylene Plant GC #1 GC #2 GC #3

  5. Analytical Instruments – PGC and DRS • The primary analysis point for this measurement is the exit from the transfer line exchangers • Before either analyzer can extract a sample, a specialized sample probe called a "pyrolysis" or "reflux“ probe must first condition it – DRS • GC #1 • Fast analysis, limited measurements, quick update on cracking severity • One PGC per furnace • Possibly backups in case of failures, this is critical data

  6. Analytical Instruments – PGC and DRS (cont.) • GC #2 • More through analysis on furnace effluent • Used by the plant control system to optimize the furnace cracking model • More than one stream from multiple furnaces could be measured on a single GC • GC #3 • For the plants with the ethane / propane feedstocks • Monitor variations in feed compositions • Naphtha feeds take too long to be analyzed by a GC, but there has been some success with FT-NIR analyzers

  7. PGC Analysis Summary

  8. GC #1 Example

  9. GC #1 Chromatogram

  10. GC #2 Example

  11. GC #2 Chromatogram – TCD 1

  12. GC #2 Chromatogram – TCD 2

More Related