1 / 6

Proposal to align and to fix the 4 MM modules on the spacer frame Patrick PONSOT

Proposal to align and to fix the 4 MM modules on the spacer frame Patrick PONSOT CEA- Saclay /DSM/ Irfu. Proposal to align the modules on the spacer frame. Drift panel. RO panel. Drift panel. RO panel. Drift panel. Spacer-frame.

oral
Télécharger la présentation

Proposal to align and to fix the 4 MM modules on the spacer frame Patrick PONSOT

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Proposal to align and to fix the 4 MM modules on the spacer frame Patrick PONSOT CEA-Saclay/DSM/Irfu Patrick PONSOT - CEA-Saclay/DSM/Irfu

  2. Proposal to align the modules on the spacer frame Drift panel RO panel Drift panel RO panel Drift panel Spacer-frame 2 additional pins to position the inserts used to align the module on the spacer-frame (same round and slotted inserts used for RO panel alignment) Pin diameter 10mm Patrick PONSOT - CEA-Saclay/DSM/Irfu

  3. Screwing of the modules for closing and for fixation on the spacer frame Temporary screws will be used to close the module before fixation on the spacer-frame M5 screws Drift panel 2x2 additional holes for alignment pins (one on each corner) RO panel Drift panel Screws for fixation of the module on the spacer-frame RO panel Screws for closing of the module Drift panel Spacer-frame Patrick PONSOT - CEA-Saclay/DSM/Irfu

  4. Screwing of the modules for closing and for fixation on the spacer frame Replacing of the temporary screws will be done one by one Temporary M5 screws Drift panel 2x2 additional holes for alignment pins (one on each corner) RO panel Drift panel Screws for fixation of the module on the spacer-frame RO panel Screws for closing of the module Drift panel Spacer-frame Patrick PONSOT - CEA-Saclay/DSM/Irfu

  5. Screwing of the modules for closing and for fixation on the spacer frame Replacing of the temporary screws will be done one by one Temporary M5 screws Drift panel 2x2 additional holes for alignment pins (one on each corner) RO panel Drift panel Screws for fixation of the module on the spacer-frame RO panel Screws for closing of the module Drift panel Spacer-frame Accessibility to the nuts is required Patrick PONSOT - CEA-Saclay/DSM/Irfu

  6. Screwing of the modules for closing and for fixation on the spacer frame Replacing of the temporary screws will be done one by one M5 screws Drift panel 2x2 additional holes for alignment pins (one on each corner) RO panel Drift panel Screws for fixation of the module on the spacer-frame RO panel Screws for closing of the module Drift panel Spacer-frame Large washer is added Patrick PONSOT - CEA-Saclay/DSM/Irfu

More Related