The Netgear Orbi is a new revolution on the home Wi-Fi router, created particularly to expand internet coverage further than any basic router can control. The Netgear Orbi attains this because it is basically two routers in one with the second system acting as a Wi-Fi or Range extender. The Netgear Orbi mesh-router system is extraterrestrial which can fill a large house with high speed Wi-Fi. It is a breeze to set up the Orbi, which has more power and range than most routers in the market. There is no perplexed procedure as it is for most Wi-Fi extenders. With the Orbi you get High-speed Wi-Fi and a completely easy setup. The Netgear Orbi's dedicated channel for router-to-extension data traffic helps the unit restrain the utmost throughput for your household's online needs and wants. The Netgear Orbi gives you Wi-Fi coverage from your main door to your porch. You get top-notch Wi-Fi in every corner of your house. NETGEAR Orbi login is a web address which lets you access the basic home page of Orbi router. By accessing Orbi Login you will be able to manage and customize your router. You can change the Wi-Fi settings, channel type and even the SSID’s on the router by accessing the Orbi Login page. The Netgear Orbi is preconfigured. You just need to use the Orbi application to configure your whole house Wi-Fi in minutes. In order to set up the Orbi first of all unplug your modem and remove and replace the backup battery if it uses one. Plug the modem back in and then you need to connect your modem to the yellow Internet port on your Orbi router using the included Ethernet cable. Once the Orbi router is back on you need to log on to the NETGEAR Orbi page in order to access the router. The Wi-Fi network name (SSID) and password are mentioned on the label at the back of Orbi router or satellite. Once your router is configured you can connect your Wi-Fi devices to your router.