1 / 17

End of Term Coop Presentation

End of Term Coop Presentation. Ben Magstadt May 9 th , 2011 – August 17 th , 2011. What I Accomplished/Learned While at Texas Instruments. FBB Analysis for OMAP4430 & OMAP4460 Continuity Test Time Reduction for OMAP4430 Smart Reflex & Vmin Analysis for OMAP4460 TDL Debug for OMAP4460.

osric
Télécharger la présentation

End of Term Coop Presentation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. End of Term Coop Presentation Ben Magstadt May 9th, 2011 – August 17th, 2011

  2. What I Accomplished/Learned While at Texas Instruments • FBB Analysis for OMAP4430 & OMAP4460 • Continuity Test Time Reduction for OMAP4430 • Smart Reflex & Vmin Analysis for OMAP4460 • TDL Debug for OMAP4460

  3. FBB Analysis • Body Biasing Effect • A voltage difference between the body and source in a transistor causes a change in the threshold voltage • In other words, it is just a difference between the Voltage on the domain and the VBB level • Forward Body Bias • Lowers the threshold voltage • Higher performance & higher power • Reverse Body Bias • Increases the threshold voltage • Lowers performance & power

  4. FBB Analysis for OMAP4 • Problem • Many patterns at speed corners need some extra help to pass at the spec Voltages • Solution • Increase in Forward Body Bias gives that extra help and reduces the Vmin level for the patterns • Implement FBB versions for the speed corner patterns for them to pass at spec Voltages • For 4460, both IVA and MPU patterns that run at speed corners need FBB • For 4430, only MPU domain that run at speed corners need FBB

  5. FBB Analysis for OMAP4460

  6. FBB Analysis for OMAP4 • Yield problems with introducing FBB • Can’t implement globally across all units • Variation among die (N2P) • Hotter Material • Needs no help to pass Voltage Specs • With FBB it exceeds Current Specs • Vmin changes little with change to N2P • Colder Material • Needs help to pass Voltage Specs • With FBB it is passes Current Specs • Vmin changes more drastically with change to N2P

  7. FBB Analysis for OMAP4430 • Problem • Find the amount of FBB needed to have a good trade-off between Power/Vmin • Need a dynamic implementation w.r.t the die parametrics (N2P) • Project • Sweep the amount of FBB applied and collect Vmin/IDDQ data • Analyze • Change in Vmins • Change in Power

  8. FBB Analysis for OMAP4430:MPU: 1.3V VBB: 1.05V FBB: 250mV

  9. FBB Analysis for OMAP4430:MPU: 1.3V VBB: 1.35V RBB: 50mV

  10. FBB Analysis for OMAP4 • Future • Large Data collection currently going on to find these ‘sweet spots’ for OMAP4430 • This process will be repeated for OMAP4460 once this is finished • Implement FBB on a chip to chip difference to optimize performance and power

  11. Continuity Test Time Reduction • Problem • Time is money • Generic wait time used for all analog pins during continuity tests • Project • Used oscilloscope to find the specific rise time for each analog pin in continuity test • Optimized the wait time based on the rise time for each pin

  12. Continuity Test Time Reduction • End Result • Saved 1.8s on Single Site • Saved 1.9s on Octal Site • Implemented a feedback procedure that waits more on certain devices that fail to rise in the specified time

  13. Smart Reflex & Vmin Analysis • Problem • OMAP4430 & OMAP4460 are creating larger power needs • Need a way to run different units at different voltages to save power • Project • Collect & analyze data on the Vmins for OMAP4460

  14. Smart Reflex & Vmin Analysis

  15. Smart Reflex & Vmin Analysis • Project (continued) • Used the data collected to find the worst case stable patterns for Vmins • Units then trimmed to these SR Fuse Values • Future • Smart Reflex process being revamped so it searches thru all patterns to find worst case Vmins • Needs more stability in patterns to be more effective

  16. TDL Debug • Problem • Failing and instable patterns that need to be tested for customer coverage • Ongoing Project • Take fail logs, shmoos, perform experiments, & talk with designers to find solutions • Future • More debug to be done to reach more stability in patterns

  17. THANK YOU!

More Related