1 / 80

Ch. 6 - Bridges

Ch. 6 - Bridges. Cisco Fundamentals of Wireless LANs version 1.1 Rick Graziani Cabrillo College. Overview.

otto-burns
Télécharger la présentation

Ch. 6 - Bridges

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Ch. 6 - Bridges Cisco Fundamentals of Wireless LANs version 1.1 Rick Graziani Cabrillo College

  2. Overview • Designed to connect two or more networks, typically located in different buildings, wireless bridges deliver high data rates and superior throughput for data-intensive, line-of-sight applications. • The bridges connect hard-to-wire sites, noncontiguous floors, satellite offices, school or corporate campus settings, temporary networks, and warehouses. • The high-speed links between the wireless bridges deliver throughput many times faster than E1/T1 lines for a fraction of the cost, thus eliminating the need for expensive leased lines or difficult-to-install fiber-optic cable. 802.11a Rick Graziani graziani@cabrillo.edu

  3. Bridge Connection

  4. Bridging Defined • Bridges are used to connect two or more wired LAN’s, usually located within separate buildings, to create one large LAN. Rick Graziani graziani@cabrillo.edu

  5. Technology Comparisons Installation Cost Monthly Cost (USD) Barriers to Implement Technology Dialup or 56K Remote locations $0 to $250 $25 to $50 Cable/DSL $0 to $250+ $25 to $150 Reliability E1, T1 $250 to $1,000+ $400 to $1000+ Availability Recurring Cost $5,000 to $200,000+ Physical obstructions Fiber $0 Licensing, Weather Microwave $15,000+ $0 $2,000 to $15,000 802.11 $0 Interference Rick Graziani graziani@cabrillo.edu

  6. RBOC DS1 DS1 DS3 New remote office - No DS1 connection available Traditional WAN Connectivity Monthly Leased Line OpEx 2 DS1: $600 1 DS3: $5000 TOTAL: $5600 RBOC provides guaranteed level of service via a Service Level Agreement (SLA) Rick Graziani graziani@cabrillo.edu

  7. RBOC 2 Mbps 2 Mbps 22 Mbps 5 Mbps 802.11b Connectivity Monthly Line Cost 2 DS1: $600 1 Fractional DS3: $3000 TOTAL: $3600 Wireless Installation Cost 7 350 Series Bridges Installed: $12,500 USD Pay Back Period: 3 months New building connected Self managed Rick Graziani graziani@cabrillo.edu

  8. RBOC 14 Mbps 14 Mbps 50 Mbps 27 Mbps 802.11a Connectivity Monthly Line Cost 2 DS1: $600 1 DS3: $5000 TOTAL: $5600 Wireless Installation Cost 7 1400 Series Bridges Installed: $40,000 USD Pay Back Period: 8 months New building connected Self managed Rick Graziani graziani@cabrillo.edu

  9. Role in Radio Network • Role in Radio Network • Determines functionality within WLAN • Determines which type of clients will be supported File Server Bridge Workgroup Bridge Bridge Access Point PCI Card PC Card Rick Graziani graziani@cabrillo.edu

  10. Introduction • The BR350 is sometimes called the multifunction bridge. Rick Graziani graziani@cabrillo.edu

  11. Bridges • Cisco bridges can be controlled and configured though command line and Web interfaces. • Management can also be done through traditional protocols like SNMP. Rick Graziani graziani@cabrillo.edu

  12. Bridge roles in the network • The Cisco bridges can be configured to operate in different modes. • The BR350, or multifunction bridge, has the same receiver sensitivity, power levels, and capabilities, as the Cisco Aironet APs with .11b radio chips. Rick Graziani graziani@cabrillo.edu

  13. Parent-Child Relationship: Root - Non-Root Rick Graziani graziani@cabrillo.edu

  14. Bridge roles in the network • Root Access Point—Use this setting to set up the bridge as a rugged access point connected to the wired LAN. When you select Access Point, the bridge's Spanning Tree Protocol (STP) function is disabled. Root Access Point Rick Graziani graziani@cabrillo.edu

  15. Bridge roles in the network • Root bridge—One bridge in each group of bridges must be set as the root bridge. A root bridge can only communicate with non-root bridges and other client devices and cannot associate with another root bridge. Root Bridge Rick Graziani graziani@cabrillo.edu

  16. Bridge roles in the network • Non-Root Bridge w/Clients—Use this setting for non-root bridges that will accept associations from client devices, and for bridges acting as repeaters. Non-root bridges can communicate with other non-root bridges, root bridges, and client devices. Non-Root Bridge with Clients Rick Graziani graziani@cabrillo.edu

  17. Bridge roles in the network • Non-Root Bridge w/o Clients—Use this setting for non-root bridges that should not accept associations from client devices. A bridge set to Non-Root Bridge w/o Clients will only communicate with a root or non-root bridge. Non-Root Bridge without Clients Rick Graziani graziani@cabrillo.edu

  18. Bridge roles in the network • Repeater Access Point—Use this setting to set up the bridge as a rugged repeater access point. A repeater access point is not connected to the wired LAN; it is placed within radio range of an access point connected to the wired LAN to extend the range of your infrastructure or to overcome an obstacle that blocks radio communication. When you select Repeater Access Point, the bridge's STP function is disabled. Repeater Access Point Rick Graziani graziani@cabrillo.edu

  19. Power Options Rick Graziani graziani@cabrillo.edu

  20. Distances Limited by 802.11 Specification Rick Graziani graziani@cabrillo.edu

  21. BR350—Front Cover LED’s Rick Graziani graziani@cabrillo.edu

  22. Bridge Model BR350 802.11b Bridge Standard Cable (6.7 dB/100 ft. loss) (6.7 dB/30.5 m) Data Rate Max. Distance Miles Km Optional Antenna 11 Mbps 20.5 33.0 21 dBi Dish 50 ft (15.2m)/side 11 Mbps 32.7 52.5 21 dBi Dish 20 ft (6.1m)/side 5.5 Mbps 32.6 52.4 21 dBi Dish 50 ft (15.2m)/side 2 Mbps 41.0 66.0 21 dBi Dish 50 ft (15.2m)/side 1 Mbps 51.7 83.2 21 dBi Dish 50 ft (15.2m)/side Note: Distances over 25 miles or 40 Km are very hard to align and install! Rick Graziani graziani@cabrillo.edu

  23. 802.11b Common Questions Cisco Aironet Bridge How Fast? 2 Mbps Max data rate 11 Mbps Typical throughput 5.5 Mbps 1.4 Mbps How Far? 3.6 Miles 5.8 Km 7.3 miles 11.7 Km Yagi antenna 20.5 Miles 33 Km 25+ miles 40+ Km Dish antenna Note: All distances may be limited by governing bodies and standards. Rick Graziani graziani@cabrillo.edu

  24. Optional 2.4GHz Antennas for Long Range • 13.5 dBi Yagi • Distances over • 7.3 miles @ 2 Mbps • 11.7 Km @ 2 Mbps • 3.6 miles @ 11 Mbps • 5.8 Km @ 11 Mbps • 21 dBi Solid Dish • For distances up to • 25+ miles @ 2 Mbps • 40+ Km @ 2 Mbps • 20.5 miles @ 11 Mbps • 33 Km @ 11 Mbps Note: Distances include 50 feet of low loss cable and 10 dB fade margin Rick Graziani graziani@cabrillo.edu

  25. Richardson Elementary Yagi Weaver- Special Education Dish Roberts Middle School Dish High School 2 Bridges One 12 dBi omni One Dish Administration 2 Bridges One 12 dBi omni One Yagi Channel #1 Channel #6 Bolich Middle School Yagi Channel #11 Price Elementary Yagi Dewitt Elementary Yagi 802.11b Bridge Application: School District Bode Elementary Yagi Lincoln Elementary Yagi Rick Graziani graziani@cabrillo.edu

  26. Lightning Rick Graziani graziani@cabrillo.edu

  27. Lightning Arrestor • Designed to protect LAN devices from static electricity and lightning surges that travel on coax transmission lines • RP-TNC connectors used on all Cisco Antennas To Antenna Lug Lockwasher Nut Ground Wire From RF Device Rick Graziani graziani@cabrillo.edu

  28. Direct Strike Protection Rick Graziani graziani@cabrillo.edu

  29. Coax Connection Sealing • Number one problems with bridges - water in the connectors • Proper sealing is important • Coax Seal is one product that is inexpensive and works great Rick Graziani graziani@cabrillo.edu

  30. Path Loss Considerations The following are needed to determine coverage ·         Antenna Gain ·         Transmitter Power ·         Receiver Performance ·         Cable Losses ·         Environmental Structures Rick Graziani graziani@cabrillo.edu

  31. Calculations of Coverage Performance Coax Length 100 ft (30.5 m)? Towers needed to clear trees and other buildings Coax Length 150 ft (45.7)? Wants 11 Mbps data rate Distance = 13 miles (20.9 Km) Rick Graziani graziani@cabrillo.edu

  32. LED indicators • When the bridge is powering on, all three LEDs normally blink. • After bootup, the colors of the LEDs represent the following: • Green LEDs indicate normal activity. • Amber LEDs indicate errors or warnings. • Red LEDs mean the unit is not operating correctly or is being upgraded. Rick Graziani graziani@cabrillo.edu

  33. Connecting to the Bridge • There are 3 basic GUI interfaces depending on the bridge image: • IOS 1400 • VxWorks BR350 • SOS WGB350 Rick Graziani graziani@cabrillo.edu

  34. 1400 with IOS GUI Rick Graziani graziani@cabrillo.edu

  35. BR350 with VxWorks GUI Rick Graziani graziani@cabrillo.edu

  36. WGB350 with SOS GUI ad SOS Menu Rick Graziani graziani@cabrillo.edu

  37. Resetting the Bridge • Resetting the Cisco bridges depends on the model. • The BR350, can be reset via the console, telnet, or browser connection. • If the password is unknown, then the console reset method is required. • The console port on the BR350. • The :resetall command can be used after rebooting the bridge, however the command must be entered within 2 minutes of rebooting. • The 350 Series Workgroup Bridge or the 1400 series bridge can be reset to default values via the Reset button, telnet, or browser connection. Rick Graziani graziani@cabrillo.edu

  38. Default Settings for BR350 and 1400 Rick Graziani graziani@cabrillo.edu

  39. Default Settings for WGB 350 Rick Graziani graziani@cabrillo.edu

  40. Basic Configuration Will will not use or discuss all of the configuration options and features.

  41. BR350 Home Page (Summary Status) Rick Graziani graziani@cabrillo.edu

  42. BR350 Map Link • The Map link opens the Map window, which contains links to every management page. • The Map window can be used to jump quickly to any system management page, or to a map of the entire wireless network Rick Graziani graziani@cabrillo.edu

  43. BR350 Network Link Rick Graziani graziani@cabrillo.edu

  44. BR350 Associations Link Rick Graziani graziani@cabrillo.edu

  45. BR350 Setup Link • The Setup link displays the Setup page, which contains links to the management pages with configuration settings. Rick Graziani graziani@cabrillo.edu

  46. BR350 Logs Link Rick Graziani graziani@cabrillo.edu

  47. BR350 - Basic Configuration • Connect just like an AP, suggest wired GUI. • Remember to set the IP address on your Ethernet NIC. Rick Graziani graziani@cabrillo.edu

  48. Root Bridge and Non-Root Bridges Rick Graziani graziani@cabrillo.edu

  49. Non-Root Bridge without ClientsRepeater Bridge Rick Graziani graziani@cabrillo.edu

  50. Bridge as Root Access Point Rick Graziani graziani@cabrillo.edu

More Related