1 / 7

Study of the QIE Calibration & Response (Current Injection Mode) at CalDet

Study of the QIE Calibration & Response (Current Injection Mode) at CalDet. N.Saoulidou 28-10-03. Procedure. Processed all Near Cal Check Runs from 26-9-03 to 20 –10-03. Examined the behavior of the mean & the rms of all the Near Electronics Channels. Identified “pathological” cases.

parksr
Télécharger la présentation

Study of the QIE Calibration & Response (Current Injection Mode) at CalDet

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Study of the QIE Calibration & Response (Current Injection Mode) at CalDet N.Saoulidou 28-10-03

  2. Procedure • Processed all Near Cal Check Runs from 26-9-03 to 20 –10-03. • Examined the behavior of the mean & the rms of all the Near Electronics Channels. • Identified “pathological” cases.

  3. Rms vs Mean for all channels (rms/mean) vs mean rms vs mean • The distributions of the rms or the (rms/mean) vs mean, appears to have for all 8 ranges some relatively large values. • The frequency of channels with (rms/mean) > 1. % is : Dac value > 0. 13 % Dac value > 3000. 0.18 % Dac value > 36000. (Range 7) 0.50 % • For small dac values the (rms/mean) may not be a good estimator of the performance of each channel and that is why the percentage of “problematic” channels drops significantly if we consider only events with dac values >3000.

  4. (rms/mean) vs mean for Run 80302 “Pathological” channels Strip vs Plane Strip vs Plane Strip vs Plane • Plotting the strip vs plane for the channels that had large rms values we found three that mostly show that kind of behavior : crate module minder ch. master ch. 1 6 8 2 2 2 10 5 2 1 13 1

  5. Removing “Pathological” channels • After removing the problematic channels the only cases with large rms values that remain are mostly in range 7 and the range transitions. • The frequency of channels with (rms/mean) > 1. % is now : Dac value > 0. 11 % Dac value > 3000. 0.06 % Dac value > 36000. (Range 7) 0.33 %

  6. Mean vs dac value Residuals no cuts Residuals (Range 7 excluded) Linearity :15.12 : 1.51 :15.83 : 1.68 Residuals (Range 7 & “bad” channels excluded) Residuals for “bad” channels (Range 7 excluded) :15.09 : 1.37 • The distribution of the residuals (for all channels) is a gaussian with a sigma of ~ 15 counts if we exclude range 7 and the “bad” channels (that do not affect the overall distribution much due to their small number). • The distribution of the residuals for the “bad” channels has a larger rms and long tails (excluding again range 7) which indicates that the mean value is also shifted for these channels (not just a broader distribution with the same mean).

  7. Summary • After processing all Near Current Injection runs at CalDet from 26-9-03 to 20-10-03 we identified 3 (out of 1440) “pathological” channels (large rms & relatively large residuals). • After excluding these channels the percentage of large rms events (for dac values > 3000.) is ~ 0.06%, with 60 % of them occurring at range 7.

More Related