1 / 7

007 (M1,M2,M3) ½”-2”

007 (M1,M2,M3) ½”-2”. Modification Overview- 007. 007 ¾-1” (1989-1991) 1½ -2” (1989-1993) ½” (1993-Current) 007M1 ¾-1” (1991-1993) 1” (1991-Current) 1¼ -1½ (1993-1994) 2” (1993-Current) 007M2 ¾” (1993-1998) 1¼ -1½ (1994-Current) 007M3

penelope-adams
Télécharger la présentation

007 (M1,M2,M3) ½”-2”

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 007 (M1,M2,M3)½”-2”

  2. Modification Overview- 007 • 007 ¾-1” (1989-1991) 1½ -2” (1989-1993) ½” (1993-Current) • 007M1 ¾-1” (1991-1993) 1” (1991-Current) 1¼ -1½ (1993-1994) 2” (1993-Current) • 007M2 ¾” (1993-1998) 1¼ -1½ (1994-Current) • 007M3 ¾” (1998-Current) QT= Ball Valve LF= Lead free (2010) PC= Polymer Coated SS= Stainless Steel U= Union End

  3. Single Access Cover Removal • Cover is o-ring sealed. • Remove bolts. • Lift cover straight off.

  4. Check Valve Removal • Check valve modules. • Modules sealed by o-ring and secured by a retainer. • Slide retainer straight out of body. • Modules can now be removed by hand or with a screwdriver flat.

  5. Check Seat Removal * Check seats are attached to the cage with a bayonet type locking system. * Module is spring loaded- Hold firmly. * Hold the cage in one hand, push the seat inward and rotate clockwise. * ¾” M2 modules snap apart.

  6. Check Disc Replacement • Check disc and disc holder can be replaced as one piece.

  7. Check Valve Reassembly Notes • Reassemble in reverse order. • Apply lubricant to o-rings. • If check retainer does not slide into place easily, make sure checks are seated properly.

More Related