1 / 14

-Take off: Tee branch

007-i. CHAPTER. -Take off: Tee branch. -Plenum to Grilles & Diffusers. Glue. W+20mm. ±300mm. Male fit. H+20mm. Male fit. Tee branch. 1. M ark, to cut the hole +20mm and to glue. Silicon. Pressing. Tee branch. 2. Insert in the hole, press and put silicon outside.

phil
Télécharger la présentation

-Take off: Tee branch

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 007-i CHAPTER -Take off: Tee branch -Plenum to Grilles & Diffusers

  2. Glue W+20mm ±300mm Male fit H+20mm Male fit Tee branch 1 • Mark, to cut the hole +20mm and to glue.

  3. Silicon Pressing Tee branch 2 • Insert in the hole, press and put silicon outside.

  4. Plenum Grills & or Diffusers Tapa H+400mm 300mm W+400mm W+400mm H+400mm H+400mm W+400mm 1 • Take an “STRIP SPECIAL”,cut the four faces plus the end cap.

  5. End cap Plenum Grills & or Diffusers Two sides Three sides Tapa 2 • With the tool “BASE” cut 45º

  6. Plenum Grills & or Diffusers Glue End cap 3 • Glue all the sides cut at 45º

  7. Aluminium tape End cap Plenum Grills & or Diffusers Exterior face 4 • Unite the four sides with aluminum tape for the exterior.

  8. Plenum Grills & or Diffusers End cap Interior face 5 • Rotate the duct in position with the interior face up.

  9. Plenum Grills & or Diffusers End cap 6 • Paste the end cap in position on the base.

  10. Plenum Grills & or Diffusers End cap 1 7 • Close the first side in position 90º vertical.

  11. Plenum Grills & or Diffusers 2 8 • Close the second side in position 90º vertical.

  12. Plenum Grills & or Diffusers 3 9 • Close the third side in position 90º vertical and press.

  13. Aluminium tape Silicon inside Plenum Grills & or Diffusers 10 • Put the aluminium tape and the silicon inside.

  14. Plenum Grills & or Diffusers Flexible duct Plenum grill Frame of grill Grill Plenum diffuser

More Related