1 / 12

How to install the Windows 7 on DOS version E10-30

How to install the Windows 7 on DOS version E10-30. I. Configure in the BIOS setup. Configure in the BIOS setup. Step1: Power on your computer and press Fn+F2 enter BIOS setup, Locate “Configuration” page, change “USB XHCI Controller” from “Enabled” to “Disabled” as picture 1-1.

piercet
Télécharger la présentation

How to install the Windows 7 on DOS version E10-30

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. How to install the Windows 7 on DOS version E10-30

  2. I. Configure in the BIOS setup

  3. Configure in the BIOS setup Step1: Power on your computer and press Fn+F2 enter BIOS setup, Locate “Configuration” page, change “USB XHCI Controller” from “Enabled” to “Disabled” as picture 1-1. Picture 1-1 Select “Disabled”

  4. Configure in the BIOS setup (Continue) Step2: Press Fn+F10 saving changes and exit as picture 1-2. Picture 1-2 Save and exit

  5. II. Install Windows 7

  6. Install Windows 7 Plug USB CD/DVD-ROM with Windows 7 disk, power on your computer and press Fn+F12, select boot from USB CD/DVD-ROM as picture 1-3, and then start to Windows install. Picture 1-3 Boot from USB CD/DVD-ROM

  7. Get XHCI Driver Copy XHCI driver from USB driver disk to HDD or download XHCI driver from LENOVO official website to HDD

  8. III. Configure in the BIOS setup

  9. Configure in the BIOS setup Step1: Power on your computer and press Fn+F2 enter BIOS setup, Locate “Configuration” page, change “USB XHCI Controller” from “Disabled” to “enabled” as picture 1-4. Picture 1-4 Select “Enabled”

  10. Configure in the BIOS setup (Continue) Step2: Press Fn+F10 saving changes and exit as picture 1-5. Picture 1-5 Save and exit

  11. Install XHCI Driver Setp1:Power on and boot to win7 , there will appear an unknown device. Step2:Using TP to double click XHCI driver setup file to install XHCI driver ,wait install complete Step3:Reboot win7 and all USB ports can works.

  12. Thank you!

More Related