Plumbing Services, 24/7 Emergency Plumbing Company

1. Plumbing Plumbing System, Plan, TOOLs, Fixtures Used.

2. Introduction • The residential plumbing system have two sides supply and the waste. • A Good plumbing system provides an adequate supply of water and removes waste without affecting the living environment. • There are three principal parts: • Water supply system. • Water and waste removal system. • Plumbing fixtures.

3. Typical Drainage System

4. Traps • Traps are used to prevent sewer odors sewer gases from entering a the living or work space, building and causing serious illness or death. • The trap most commonly used with plumbing fixtures is the P-trap. The P-trap gets its name because of its general shape-that of the letter P. • The term Trap Seal refers to the water being held in the bent portion of a fixture trap. The trap seal forms a seal against the passage of sewer gases through the trap and into the building.

5. Plumbing Symbols

6. Plumbing Fixture Schedule

7. Plumbing Plans • The Plumbing Plan is a annotated diagram or schematics of the complete plumbing system. The plumbing plan shows the location, size, and type of all plumbing equipment. • The plumbing plan should include: • Waste lines and vent stacks. • Drain and plumbing fixture locations. • Size and type of pipe to be used. • A plumbing fixture schedule. • Symbols Legend. • General notes. • A plumbing plan is required for each floor of the house.

8. Prepared by: www.23hourplumbing.com.au For more info Contact Us on – 1300 070 399

9. Thank you!!