1 / 9

酸碱滴定终点误差计算法

酸碱滴定终点误差计算法. 徐海超. 终点误差定义为 ：. 在化学计量点时满足 ：. ∑[ 得质子产物 ] sp = ∑[ 失质子产物 ] sp. 终点时 ：. 强酸强碱的滴定. 以 HCl 滴定 NaOH 为例. 化学计量点时：. [H + ] sp = [OH - ] sp. 终点时：. C x = [H + ] ep - [OH - ] ep. 强酸滴定弱碱 B -. [H + ] sp = [OH - ] sp +[B - ] sp. 化学计量点时：.

portia-melendez
Télécharger la présentation

酸碱滴定终点误差计算法

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 酸碱滴定终点误差计算法 徐海超

  2. 终点误差定义为：

  3. 在化学计量点时满足： ∑[得质子产物] sp= ∑[失质子产物]sp • 终点时：

  4. 强酸强碱的滴定 • 以HCl滴定NaOH为例 • 化学计量点时： [H+]sp = [OH-]sp • 终点时： Cx = [H+]ep - [OH-]ep

  5. 强酸滴定弱碱B- [H+]sp = [OH-]sp +[B-]sp • 化学计量点时： Cx = [H+]ep - [OH-]ep - [B-]ep • 忽略[OH-]ep Cx = [H+]ep - [B-]ep

  6. 多元酸碱 Cx = [HPO42-]sp1 -[H+]sp1 - [H3PO4]sp • 以NaOH滴定H3PO4为例 • 化学计量点时： [H+]sp1 +[H3PO4]sp1 = [OH-]sp1 +[HPO4-]sp1 + 2[PO43-]sp1 • 忽略[OH-]， [PO43-]

  7. 混合酸碱 [H+]sp = [NH3] sp+ [OH-]sp • NaOH滴定HCl, NH4Cl混合溶液中的HCl 化学计量点时： Cx = [NH3]ep - [H+]ep

  8. 结论 • 写出化学计量点是的质子条件 • 做适当的忽略 • 将质子条件等式一边减去另一边得到 Cx，代入误差计算公式 • 根据相关条件几算出各形体浓度，从 而计算出滴定误差

  9. 附：证明 浓度为Ca的强酸滴定浓度CB弱碱B- • [H+]ep + [HB] ep – Caep = [OH-] ep • Caep – [HB] ep = [H+] ep – [OH-] ep • Caep – (CBep – [B-] ep) = [H+] ep – [OH-] ep • Caep – CBep = [H+] ep – [OH-] ep – [B-] ep 忽略[OH-] ep • CX = Caep – CBep = [H+] ep – [B-] ep

More Related