Mistakes To Avoid When Choosing Used Plastic Machinery

1. http://www.premierplasticsnj.com Mistakes To Avoid When Choosing Used Plastic Machinery

2. Mistakes To Avoid When Choosing Used Plastic Machinery The business of manufacturing plastic parts can be a lucrative one if it is done the right way. To be able to start this business, you will need to buy a plastic injection molding machine. But the problem is that new plastic injection molders are very expensive. If you are operating on a limited budget, you probably will not be able to afford them. The good news is that there are used plastic machinery on the market that can do the job of producing plastic parts very well. They are cheaper compared to the new injection molders and can last long if you maintain them properly. http://www.premierplasticsnj.com

3. Mistakes To Avoid When Choosing Used Plastic Machinery When looking for the right used plastic machinery to buy, there are a number of mistakes you need to avoid. First, you need to avoid buying a machine that does not work. Before you pay for the machine, you need to make sure that it is fully inspected and tested. Do not agree to have the machine delivered to your company before verifying if it is working or not. Even if you trust the supplier that you are buying from, you need to do due diligence and make sure that every part of the machine is checked and proven to be in good working condition. http://www.premierplasticsnj.com

4. Mistakes To Avoid When Choosing Used Plastic Machinery Another mistake you should not make when you are looking for the right used plastic machinery is choosing large screw diameters. The problem with large screw diameters is that they can lead to quality problems because of material degradation. When they are used with small shot sizes, the plastic material takes very long to be heated by barrel heaters. If the shot size is smaller compared to the maximum shot capacity of the injection unit, material degradation is likely to occur especially when you are dealing with heat sensitive materials. http://www.premierplasticsnj.com

5. Mistakes To Avoid When Choosing Used Plastic Machinery Choosing general purpose screws is another mistake that you cannot afford to make when you are looking for the right used plastic machinery. While these screws have the advantage of being used with most plastic parts such as Nylon, PE, PP, PC and PET, part quality and productivity rates for some materials tend to lower compared to the advanced molding screw designs. If you want the plastic machinery to perform efficiently and effectively, you should go for the advanced screw designs such, for instance the barrier. But if you are planning to mold a variety of different materials, the general purpose screws can work just fine. http://www.premierplasticsnj.com

6. Mistakes To Avoid When Choosing Used Plastic Machinery You also should not make the mistake of choosing used plastic machinery that has limited injection pressure. For you to be able to make quality parts consistently, you need to make sure that the molding process is not limited by the injection pressure. The machine that you will choose should have at least ten percent injection pressure in reserve to allow it to adjust automatically to plastic normal variation when in plastic material viscosity. If you buy a machine that has insufficient injection pressure, short moldings will be produced. http://www.premierplasticsnj.com

7. Mistakes To Avoid When Choosing Used Plastic Machinery For more tips on how to choose the right used plastic machinery, check out my website today at www.premierplasticsnj.com. http://www.premierplasticsnj.com

8. http://www.premierplasticsnj.com Mistakes To Avoid When Choosing Used Plastic Machinery