Mistakes You Should Not Make When Buying Used Injection Molding Machines

1. http://www.premierplasticsnj.com Mistakes You Should Not Make When Buying Used Injection Molding Machines

2. Mistakes You Should Not Make When Buying Used Injection Molding Machines • Choosing the right used injection molding machines is a must if you want to be able to create efficient machining parts constantly in your business. If you choose the wrong machine, you will not be able to get value for the money that you would have invested on it. • It is imperative that you check the overall reliability of the machine and make sure that it will be able to serve the purpose for which you are buying it for. In case of any doubts regarding the machine, do not be hesitant to talk to the dealer you are buying from. http://www.premierplasticsnj.com

3. Mistakes You Should Not Make When Buying Used Injection Molding Machines • Make sure that its performance is checked by a professional just to verify that it is in good condition. There are various mistakes you will need to avoid when buying the used injection molding machines if you want to realize value for your money. • One of these mistakes is buying a machine that does not work. The key to buying a reliable used injection molding machine is to find one that is fully tested and inspected before it is delivered to your site. http://www.premierplasticsnj.com

4. Mistakes You Should Not Make When Buying Used Injection Molding Machines • If the machine is delivered to you before it is inspected, you stand the chance of suffering loss of production as a result of multiple breakdowns. Another mistake you do not want to make when buying used injection molding machines is selecting large screw diameters. • The problem with large screw diameters is that they can cause quality problems as a result of material degradation. The plastic material will be forced to spend more time being heated by the barrel heaters when the large screw diameters are used with small shot sizes. http://www.premierplasticsnj.com

5. Mistakes You Should Not Make When Buying Used Injection Molding Machines • If the shot size is smaller as compared to the maximum shot capacity of the injection units, material degradation is more likely to occur. It will also not be a good idea to select general purpose screws when buying used injection molding machines. • Even though these screws are very flexible and ideal for molding companies that usually mold different types of materials, they are not very good for some materials. Productivity rates and part quality will be lower as compared to using advanced injection screw designs. http://www.premierplasticsnj.com

6. Mistakes You Should Not Make When Buying Used Injection Molding Machines • An example of a screw that is going to work well with the second hand injection molding machine is a barrier screw. Just to be sure that you are getting the right screw for your machine, make sure that you seek advice from the dealer that you are buying from. • Last but not least, you should not make the mistake of buying used injection molding machines that have limited injection pressure. This is because a machine that has limited injection pressure is going to hinder you from making quality parts consistently.   http://www.premierplasticsnj.com

7. Mistakes You Should Not Make When Buying Used Injection Molding Machines • A good injection molding machine needs to have at least 10 percent injection pressure in reserve to allow it to automatically adjust to normal variation and avoid producing moldings that are too short. http://www.premierplasticsnj.com

8. Mistakes You Should Not Make When Buying Used Injection Molding Machines • To help you buy the right used injection molding machines for your needs, check out www.premierplasticsnj.com today. http://www.premierplasticsnj.com

9. http://www.premierplasticsnj.com Mistakes You Should Not Make When Buying Used Injection Molding Machines