1 / 18

Chem 12 Chapter 15 Pg 599-605, 608-611

Titrations. Chem 12 Chapter 15 Pg 599-605, 608-611. Acid-base titration is a process for calculating the concentration of a known volume of acid or base. ACID-BASE REACTIONS Titrations. H 2 C 2 O 4 (aq) + 2 NaOH(aq) ---> acid base Na 2 C 2 O 4 (aq) + 2 H 2 O(liq)

presley
Télécharger la présentation

Chem 12 Chapter 15 Pg 599-605, 608-611

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Titrations Chem 12 Chapter 15 Pg 599-605, 608-611

  2. Acid-base titration is a process for calculating the concentration of a known volume of acid or base.

  3. ACID-BASE REACTIONSTitrations H2C2O4(aq) + 2 NaOH(aq) ---> acidbase Na2C2O4(aq) + 2 H2O(liq) Carry out this reaction using a TITRATION.

  4. Setup for titrating an acid with a base

  5. Sample Problem • In this sample titration, we are trying to determine the concentration of 20.00 mL of HCl. In the titration we will be neutralizing the HCl with 0.150 M NaOH.

  6. Step 1: The NaOH, the titrant, is placed in the buret. The titrant is the solution of known concentration that is added from the buret.

  7. Step 2: The HCl is placed in the Erlenmeyer flask along with approximately 20.00 mL of distilled water and 2-3 drops of phenolphthalein indicator. Since the solution in the flask is acidic, phenolphthalein is colourless.

  8. Step 3: NaOH is added to the HCl in the flask. When the NaOH comes in contact with the solution in the flask, it turns pink and then the pink colour quickly disappears. This is because the OH- from the NaOH interact with the phenolphthalein to change the phenolphthalein from colourless to pink.

  9. The solution becomes clear again as the hydronium ions from the hydrochloric acid neutralize the added hydroxide ions. As more NaOH is added, it takes longer for the pink colour to disappear. • As it starts taking longer for the pink colour to disappear, the sodium hydroxide is added a drop at a time.

  10. Acid-Base Titration

  11. The equivalence point of the titration is reached when equal numbers of moles of hydronium and hydroxide ions have been reacted. • When this happens in this titration, the pH of the solution in the flask is 7.0 and the phenolphthalein indicator is colourless. • This would be a good time to stop, however the indicator is still colourless, so must keep going.

  12. Titration Curve

  13. Step 4: Add as little excess NaOH as possible. We want to add a single drop of NaOH to the colourless solution in the flask and have the solution in the flask turn pink and stay pink while the contents of the flask are swirled. • This permanent colour change in the indicator is known as the endpointof the titration and the titration is over.

  14. Titration Curve Zumdahl, Zumdahl, DeCoste, World of Chemistry2002, page 527

  15. Solve the problem • 1st write the equation for the reaction: HCl(aq) + NaOH(aq) → NaCl(aq) + H2O(l) • 2nd solve for the amount of moles of the titrant used. NaOH mol = 0.150 mol/L x 0.02567 L= 3.85 x 10-3 mol NaOH Found in titration experiment • 3rd using stoichiometry, solve for the concentration of HCl , knowing it is a 1:1 mole ratio 3.85 x 10-3 mol= 0.192 M 0.02000 L

  16. SAMPLE PROBLEM 2 • In an acid-base titration, 17.45 mL of 0.180 M nitric acid, HNO3, were completely neutralized by 14.76 mL of aluminium hydroxide, Al(OH)3. Calculate the concentration of the aluminium hydroxide.

  17. SAMPLE ANSWER 2 • The balanced equation for the reaction is: 3HNO3(aq) + Al(OH)3(aq) → Al(NO3)3(aq) + 3H2O(l) • The number of moles of nitric acid used is: y mol = 0.180 mol/L x 0.01745 L = 3.14 x 10-3 mol HNO3 • From the stoichiometry of the reaction, the number of moles of aluminium hydroxide reacted is: 3.14 x 10-3 mol HNO3 x 1 mol Al(OH)3 = 1.05 x 10-3 mol 3 mol HNO3 • Therefore, the concentration of the aluminium hydroxide is: 1.05 x 10-3 mol Al(OH)3 = 0.0711 M 0.01476 L

  18. Practice: • Page 602 # 17-19

More Related