1 / 7

AMOS/OTA Techniques in Orthopaedic Trauma

AMOS/OTA Techniques in Orthopaedic Trauma. Mitchell Goldflies. Conventional Non-Locked Plating. Screw-Plate interface allows for toggle Stability depends on frictional force which is proportional to screw insertion torque

preston-bishop
Télécharger la présentation

AMOS/OTA Techniques in Orthopaedic Trauma

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. AMOS/OTA Techniques in Orthopaedic Trauma Mitchell Goldflies

  2. Conventional Non-Locked Plating • Screw-Plate interface allows for toggle • Stability depends on frictional force which is proportional to screw insertion torque • Instability results when patient load exceeds bone-plate frictional force • Screw failure is sequential

  3. Osteopenic Bone Model - Load to Failure • Compared to a 4.5 bicortical non-locking screw: • 4.0 locking unicortical screw – 17% greater • 4.0 locking bicortial screw – 82% greater • 5.0 locking bicortial screw – 92% greater • Not a great difference seen in normal bone • Unicortial locked screws poor in axial rotation

  4. Indications for locked plating • Osteroprosis • Small segments • Metaphyseal (Condylar) fractures

  5. Hybrid Fixation • Locking screws in metaphysis, nonlocking screws in diaphysis • Initial screws are not nonlocking and pull bone (fracture) to contoured plate for reduction, then addition of locking screws • Hybrid fixation similar to locked in stiffness

  6. Costs 4.5 DCP 8 hole 4.5 DCP Locking

  7. Cross Threading • 5% off axis – 43% reduction in bending strength • 10% off axis – 68% reduction in bending strength

More Related