1 / 10

Stand-By Emergency Lighting Inverter

Stand-By Emergency Lighting Inverter. Single Phase 75 W – 300 W. What is the Cobra Micro?. It is a single phase Emergency Lighting Inverter which is a stand-by unit. It defends your environment against unwanted power outage and electrical disturbances. It continually

ranit
Télécharger la présentation

Stand-By Emergency Lighting Inverter

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Stand-By Emergency Lighting Inverter Single Phase 75 W – 300 W

  2. What is the Cobra Micro? It is a single phase Emergency Lighting Inverter which is a stand-by unit. It defends your environment against unwanted power outage and electrical disturbances. It continually maintains efficient (over 99%) AC Emergency Power to operate all emergency lighting fixtures at “full-light” output, providing Superior dependability and security to commercial/industrial environments in a small footprint. It is available in power levels of 75, 100, 125, 200 and 300

  3. Why is the Cobra Micro better? With the increased environmental awareness and the increase in energy costs, what are you to do? With the Cobra technology you can reduce both energy cost and energy consumption. Cobra’s technology allows a much higher efficiency rating, consuming less power. Consuming less energy saves your money and the environment while keeping the same dependability you expect from DSPM.

  4. What makes theCobra Micro different? • DSPM Watchdog software always on guard. • Dependable DSP/PWM technology for unsurpassed reliability. • Economical for the lowest overall cost for your light safety, with an Energy Star Rating. • Temperature compensating technology that controls batteries for the longest battery life. • Sealed maintenance free batteries. • Full light output for entire 90 minutes. • Self-diagnostics for a safe and secure lighted environment. • Pure sine wave output for all types of lamps. • ECM module is a patented technology used by DSPM. • Backup solutions for multiple applications such as: indoor and outdoor emergency lighting, exits, cash registers, computers, strategic electronics and more! • 10 Year pro-rated battery warranty • 5 Year power train warranty • Meets federal, state and local codes: UL924, NFPA 101, NFPA 70, NEC and OSHA. • Complies with the Buy American Act.

  5. Specifications *Standard Power Levels...........75, 100, 125, 200 and 300 Watts *Input Voltage ..........................120 or 277 VAC *Input Voltage Range...............+10%. -15% *Output Voltage........................120 or 277 VAC *Output Voltage Regulation......±5% for all loads and battery discharge mode *Output Frequency Range........60 Hz, ±1% Crest Factor..............................2.5:1 typical Input Protection........................Input Main Circuit Breaker Output Protection.....................Output Main Circuit Breaker Surge Protection......................The unit will protect itself and the load against surges as defined in ANSI/EEE C62.45 category A and B Battery......................................Sealed maintenance-free (AGM) lead calcium Recharge Current.....................Conforms to UL924 standards External Battery........................Provision for hardware connection of external battery cabinets or DC source Efficiency..................................≥99% at 100% linear load Audible Noise...........................<45dB measured on Response Curve “A” Cul Listed.................................To UL standard 924 and 1778 / ETL Pending Operating Temperature............0º to 40ºC (32º to 104ºF) Storage Temperature...............-20º to 60ºC (-4º to 140ºF) Humidity...................................5 - 95%, Non-condensing Transfer Time...........................16msec – 60msec *Consult factory for others. Specifications subject to change without notice.

  6. System Drawing: Specification Chart:

  7. Brochure For your convenience you can download the brochure with all the information about our Cobra Micro from our website: www.dspmanufacturing.com

  8. Data Sheet For your convenience you can download the data sheet with all the information along with how to order our Cobra Micro from our website: www.dspmanufacturing.com

  9. Other Downloads For your convenience you can also download the technical specification, manual, field service documents, and white papers for the Cobra Micro from our website: www.dspmanufacturing.com

  10. If you have any other questions or would like more information Call 1.877.DSPM.POWER 1.877.377.6769 Thank You! 089-0007-01B

More Related