1 / 6

STEM Agendas

STEM Agendas. Week 12 11/13 – 11/14. Agenda 11/13. Learning Targets: Apply geometric and dimension constraints to design 3D-modeled parts. Assemble the product using a modeling program. To Do Today Discuss Sketch Plane Cube dimension drawings FIX Sketch Plane Cube dimension Drawings

renate
Télécharger la présentation

STEM Agendas

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. STEM Agendas Week 12 11/13 – 11/14

  2. Agenda 11/13 Learning Targets: • Apply geometric and dimension constraints to design 3D-modeled parts. • Assemble the product using a modeling program. To Do Today • Discuss Sketch Plane Cube dimension drawings • FIX Sketch Plane Cube dimension Drawings By end of period – • Fix Sketch Plane Cube (DUE BY 11/14) • Mallet Head/Handle and Assembly If finished with Pegboard Project • Continue Hydraulic Arm

  3. Sketch Plane cube dimension drawings • If the dimension is highlighted in: • PINK – Dimension Needed (good!) • YELLOW – Dimension Not Needed • GREEN – Duplicate Dimension (Not needed) • If the dimension is CIRCLED in yellow there is a better place to put it (you have broken a rule for dimensioning that you didn’t need to). • LINES highlighted in yellow show placement errors.

  4. Agenda 11/14 Learning Targets: • Apply geometric and dimension constraints to design 3D-modeled parts. • Assemble the product using a modeling program. To Do Today • Some Classes: Finish Sketch Plane Cube • Fix Sketch Plane Cube (DUE BY end of period) • Work on/Finish Pegboard Toy • Mallet Head/Handle and Assembly • FINAL ASSEMBLY (DUE BY FRIDAY!) If finished Continue Hydraulic Arm

  5. Tomorrow 11/15 • Guest Speaker Expectations • Respectful • No talking during presentation • Raise your hand to speak • Excellence • All REBS! • Be Responsible • Be on time • Come in quietly and sit down, ready to listen • Safe • Sitting in chair with 4 on the floor

  6. Tomorrow 11/16 Learning Targets: • Apply geometric and dimension constraints to design 3D-modeled parts. • Assemble the product using a modeling program. To Do Today • Work on/Finish Pegboard Toy • Mallet Head/Handle and Assembly • FINAL ASSEMBLY • 8th GRADE: DUE BY END OF PERIOD (TODAY)! • 7th GRADE: DUE BY END OF PERIOD ON MONDAY! If finished Continue Hydraulic Arm

More Related