1 / 16

Richard Upcavage 6/11/2009

Center Stack Coil Concept. Richard Upcavage 6/11/2009. Shims. Attach G-10 Insulator Housing. Attach hardware. Step 1. Step 1. Step 1. Add G-10 Insulator. Temporally add hardware to hold insulator in place. Step 2. Step 2. Attach final conductor assembly. Step 3. Step 3. Step 3.

reynard
Télécharger la présentation

Richard Upcavage 6/11/2009

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Center Stack Coil Concept Richard Upcavage6/11/2009

  2. Shims Attach G-10 Insulator Housing Attach hardware Step 1

  3. Step 1

  4. Step 1

  5. Add G-10 Insulator Temporally add hardware to hold insulator in place Step 2

  6. Step 2

  7. Attach final conductor assembly Step 3

  8. Step 3

  9. Step 3

  10. Use alignment tool to adjust connector assemblies then add Power cable and permanently tighten Power cable hardware per spec. Step 4

  11. Step 4

  12. Step 4

  13. Belville washers … Step 5 - Final Assembly

  14. Step 5 - Final Assembly

  15. Step 5 - Final Assembly

  16. Step 5 - Final Assembly

More Related